Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MSI D1505
Summary of Contents for MSI D1505
- Page 1 D1505 MS-S3651 Server Motherboard User Guide...
-
Page 2: Table Of Contents
Contents Regulatory Notices ....................... 4 Safety Information ......................6 Specifications ........................ 7 Overview of Components ..................... 9 Rear I/O Panel ......................10 UID LED Button ......................10 COM Port ........................10 VGA Port ........................10 USB 3.2 Gen 1 Type-A Port ..................10 GbE RJ45 LAN Port (for mgmt.) ................ - Page 3 Power Connectors ...................... 22 JPWR2: 24-Pin Main Power Connector ..............22 JPWR1: 8-Pin 12V Power Connector ............... 23 SATAPWR1: 4-Pin Power Connector ..............23 Cooling Connectors ....................24 SYSFAN1~6: Fan Connectors ................... 24 USB Connectors ......................25 JUSB1: USB 3.2 Gen 1 Header ................. 25 JUSB2: USB 3.2 Gen 1 Type-A Port .................
-
Page 4: Regulatory Notices
Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://csr.msi.com/global/index CE Conformity Hereby, Micro-Star International CO., LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive. - Page 5 Copyright and Trademarks Notice Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied.
-
Page 6: Safety Information
Safety Information ∙ Always read the safety instructions carefully. ∙ Keep this User’s Manual for future reference. ∙ Keep this equipment away from humidity. ∙ Lay this equipment on a reliable flat surface before setting it up. ∙ The openings on the enclosure are for air convection hence protects the equipment from overheating. -
Page 7: Specifications
Specifications Model D1505GB2N-25G-HE Form factor Micro-ATX Dimensions 243.84 mm (9.6”) x 243.84 mm (9.6”) ∙ Single Intel® Xeon® E-2400 Processor, TDP up to 95W Processor - Intel® Pentium® G7400/G7400T Processors, TDP up to 46W Chipset Intel® C266 Chipset ∙ 2 x 25G SFP28 LAN ports Networking - Intel®... - Page 8 Model D1505GB2N-25G-HE ∙ 1 x Front panel header ∙ 1 x SPI TPM header ∙ 1 x COM port header ∙ 1 x GPIO header System Connectors ∙ 1 x PMBus header ∙ 3 x I2C headers ∙ 1 x IPMB header ∙...
-
Page 9: Overview Of Components
Overview of Components BMC_LED1 BMC_LED2 M2_1 BAT1 Flash BMC_F1 PCIE-SW1 BIOS Flash JNVME4_SATA1 JTPM1 JNVME_SATA_SEL1 JNVME2 JNVME3 JNVME1_SATA2 JNVME_SATA_SEL2 Overview of Components... -
Page 10: Rear I/O Panel
Rear I/O Panel GbE RJ45 LAN Port COM Port (for mgmt.) SFP28 LAN LED 25G SFP28 LAN Port UID LED Button VGA Port USB 3.2 Gen 1 Type-A Port UID LED Button The UID (Unit Identification) button help users identify and locate a system, especially in high-density rack environments. -
Page 11: Gbe Rj45 Lan Port (For Mgmt.)
GbE RJ45 LAN Port (for mgmt.) Connect a specially configured RJ45 console cable to this jack for network routers/ switches to communicate with the system through a serial connection. Link/ Activity LED Speed LED Status Description Status Description No link 10 Mbps Linked Orange 100 Mbps... -
Page 12: Block Diagram
Block Diagram DIMMA1 DDR5 Channel A PCIe 5.0 (x16) 2 x DIMM Slots PCIE_2 Intel ® PCIe x16 Slot#1 DIMMA2 RPL-S DIMMB1 DDR5 Channel B PCIe 4.0 (x4) 2 x DIMM Slots PCIE_1 PCIe x8 Slot#2 DIMMB2 Socket LGA1700 USB 3.0/ 2.0 2 x USB Connectors Intel ®... -
Page 13: Component Contents
Component Contents Component Page CPU Socket Memory Slots DIMMA1~2, DIMMB1~2: DDR5 DIMM Slots Storage Connectors M2_1: M.2 Slot (M Key, PCIe 4.0 x4, 22110/ 2280) JNVME2~3, JNVME4_SATA1, JNVME1_SATA2 : Slimline SAS 4i Connectors Expansion Slots PCIE_1~2: PCIe Expansion Slots Power Connectors JPWR2: 24-Pin Main Power Connector JPWR1: 8-Pin 12V Power Connector SATAPWR1: 4-Pin Power Connector... -
Page 14: Cpu Socket
CPU Socket Introduction to the LGA1700 CPU The surface of the LGA1700 CPU has four notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator. ⚠ Important ∙... -
Page 15: Cpu & Heatsink Installation
CPU & Heatsink Installation Use appropriate ground straps, gloves and ESD mats to protect yourself from electrostatic discharge (ESD) while installing the processor. ⚠ Important Images are for illustration purposes only; actual parts may vary. ⚽ https://youtu.be/KMf9oIDsGes CPU Socket... -
Page 16: Memory Slots
Memory Slots DIMMA1~2, DIMMB1~2: DDR5 DIMM Slots DIMMA1 DIMMB1 Channel A Channel B DIMMA2 DIMMB2 Recommended Memory Population Quantity of DIMMs DIMMA1 Channel A DIMMA2 DIMMB1 Channel B DIMMB2 “V” indicates a populated DIMM slot. ⚠ Important Only support UDIMM. ∙... -
Page 17: Installing Memory Modules
Installing Memory Modules 1. Open the side clips to unlock the DIMM slot. 2. Insert the DIMM vertically into the slot, ensuring that the off-center notch at the bottom aligns with the slot. 3. Push the DIMM firmly into the slot until it clicks and the side clips automatically close. -
Page 18: Storage Connectors
Storage Connectors M2_1 JNVME2 JNVME3 JNVME4_SATA1 JNVME1_SATA2 Storage Specifications Name Description M2_1 PCIe 4.0 x4, 16 GT/s JNVME2 PCIe 4.0 x4, 16 GT/s JNVME3 PCIe 4.0 x4, 16 GT/s PCIe 4.0 x4, 16 GT/s JNVME4_SATA1 SATA 3.0, 6 Gb/s (default) PCIe 3.0 x4, 8 GT/s JNVME1_SATA2 SATA 3.0, 6 Gb/s (default) -
Page 19: M2_1: M.2 Slot (M Key, Pcie 4.0 X4, 22110/ 2280)
M2_1: M.2 Slot (M Key, PCIe 4.0 x4, 22110/ 2280) Please install the M.2 solid-state drive (SSD) into the M.2 slot as shown below. Installing M.2 SSD ⚽ Video Demonstration Watch the video to learn how to Install M.2 SSD. 1. -
Page 20: Jnvme2~3, Jnvme4_Sata1, Jnvme1_Sata2 : Slimline Sas 4I Connectors
JNVME2~3, JNVME4_SATA1, JNVME1_SATA2 : Slimline SAS 4i Connectors GND-12 GND-1 RXP0 TX0+ RXN0 TX0- GND-11 GND-2 RXP1 TX1+ RXN1 TX1- JNVME2~3 GND-10 GND-3 JNVME4_SATA1 JNVME1_SATA2 GND-9 GND-4 RX2+ TX2+ RX2- TX2- GND-8 GND-5 RX3+ TX3+ RX3- TX3- GND-7 GND-6 Storage Connectors... -
Page 21: Expansion Slots
Expansion Slots PCIE_1: PCIe 4.0 x 8 slot (Gen 4 x 4 signal from CPU) PCIE_2*: PCIe 5.0 x 16 slot (Gen 5 x 16 signal from CPU) *The PCIe x16 slot (PCIE_2) can be configured into two PCIe x8 lanes by sliding the PCIe bifurcation switch. -
Page 22: Power Connectors
Power Connectors JPWR1 JPWR2 SATAPWR1 JPWR2: 24-Pin Main Power Connector This connector allows you to connect an ATX power supply. +3.3V +3.3V +3.3V -12V PS-ON# JPWR2 PWR OK 5VSB +12V +12V +3.3V Power Connectors... -
Page 23: Jpwr1: 8-Pin 12V Power Connector
JPWR1: 8-Pin 12V Power Connector This connector allows you to connect an ATX power supply. P12V P12V JPWR1 P12V P12V SATAPWR1: 4-Pin Power Connector This connector is used to provide power to SATA devices. SATAPWR1 P12V ⚠ Important Make sure that all power connectors are securely connected to the power supply to ensure stable operation of the motherboard. -
Page 24: Cooling Connectors
Cooling Connectors SYSFAN1 SYSFAN2 SYSFAN3 SYSFAN4 SYSFAN5 SYSFAN6 2 3 4 SYSFAN1~6: Fan Connectors The fan connector supports system cooling fans with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V;... -
Page 25: Usb Connectors
USB Connectors JUSB1: USB 3.2 Gen 1 Header This header is backward-compatible with USB 2.0 devices and supports data transfer rate up to 5 Gbps. USB_VCC1 RX1- RX1+ TX2+ TX1- TX2- JUSB1 TX1+ RX2+ RX2- USB_VCC2 No pin JUSB2: USB 3.2 Gen 1 Type-A Port JUSB2 The USB (Universal Serial Bus) port is used for connecting USB devices such as keyboards, mice, or other compatible peripherals. -
Page 26: Other Connectors And Components
Other Connectors and Components JFP1: Front Panel Header The front panel header is provided for electrical connection to the front panel switches and LEDs. PWR_LED+ FP_PWR No pin SYS_ID_LED+ PWR_LED- SYS_ID_LED- HDD_ACT_LED+ SYS_FAULT_LED1- HDD_ACT_LED- SYS_FAULT_LED2- PWR_BTN- NIC#1_ACT_LED+ JFP1 PWR_BTN_GND NIC#1_ACT_LED- RST_BTN- SMB_SDA RST_BTN_GND... -
Page 27: Jtpm1: Spi Tpm Header
JTPM1: SPI TPM Header This header connects to a TPM (Trusted Platform Module) (optional). Please refer to the TPM security platform manual for more details. No Pin SPI_TPM_CS0_N RST_RSMEST_N SPI_PCH_FLASH_CS1_N P3V3_AUX SPI_TPM_CLK SPI_PCH_IO2 JTPM1 SPI_PCH_IO3 SPI_TPM_MISO SPI_TPM_MOSI SPI_TPM_CS2_N P3V3_AUX TPM_IRQ_N P3V3_AUX RST_TPM_N P3V3_AUX... -
Page 28: Jgpio1: Gpio Header
JGPIO1: GPIO Header This header is provided for the General-Purpose Input/Output (GPIO) peripheral module. USER_GPIO0 USER_GPIO1 USER_GPIO2 USER_GPIO3 JGPIO1 USER_GPIO4 USER_GPIO5 USER_GPIO6 USER_GPIO7 No pin JPMBUS1: PMBus Header Power Management Bus (PMBus) is a variant of the System Management Bus (SMBus) which is targeted at digital management of power supplies. -
Page 29: Fp_I2C_1, Rbp_I2C_1~2: I2C Headers
FP_I2C_1, RBP_I2C_1~2: I2C Headers I2C headers are used to connect to the System Management Bus (SMBus). FBP_I2C_1 is for front HDD backplane, and RBP_I2C_1~2 are for rear HDD backplanes. FP_I2C_1 I2C_CLK RBP_I2C_1 I2C_DATA RBP_I2C_2 JIPMB1: IPMB Header Intelligent Platform Management Bus (IPMB) header is used to connect various management components, such as Baseboard Management Controller (BMC). -
Page 30: Jci1: Chassis Intrusion Header
JCI1: Chassis Intrusion Header This header connects to the chassis intrusion switch cable. If the chassis is opened, the chassis intrusion mechanism will be activated. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record. -
Page 31: Bat1: Cmos Battery
BAT1: CMOS Battery If the CMOS battery is out of charge, the time in the BIOS will be reset and the data of system configuration will be lost. In this case, you need to replace the CMOS battery. Replacing CMOS battery 1. -
Page 32: Jumpers
Jumpers ⚠ Important Avoid adjusting jumpers when the system is on; it will damage the motherboard. JSEL_BMC1 JNVME_SATA_SEL1 JNVME_SATA_SEL2 Jumper Name Default Setting Description CPLD Power-on Jumper 1-2: Disable (Default) 2-3: Enable CMOS Clear Jumper 1-2: Normal (Default) 2-3: Clear RTC registers Password Clear Jumper 1-2: Normal (Default) 2-3: Clear password... -
Page 33: Onboard Leds
Onboard LEDs BMC_LED1~2: BMC Heartbeat LEDs This LED indicates the BMC (Baseboard Management Controller) status. LED Status Description BMC is not activated BMC is functioning normally Blinking LED_H1, LED_L1: Port 80 Debug LEDs The Port 80 Debug LEDs display progress and error codes during and after POST (Power-On Self Test). - Page 34 EPS.MSI.COM MSI.COM...
Need help?
Do you have a question about the D1505 and is the answer not in the manual?
Questions and answers