MSI D3052 User Manual
MSI D3052 User Manual

MSI D3052 User Manual

Server motherboard

Advertisement

D3052
MS-S3661
Server Motherboard
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D3052 and is the answer not in the manual?

Questions and answers

Summary of Contents for MSI D3052

  • Page 1 D3052 MS-S3661 Server Motherboard User Guide...
  • Page 2: Table Of Contents

    Contents Regulatory Notices ....................... 4 Safety Information ......................6 Specifications ........................ 7 Overview of Components ..................... 9 Rear I/O Panel ......................10 UID LED Button ..................... 10 COM Port ....................... 10 VGA Port ........................ 10 USB 3.2 Gen 1 Type-A Port ................... 10 GbE RJ45 Port (for mgmt.) ...................
  • Page 3 Power Connectors ...................... 21 JPWR2: 24-Pin Main Power Connector ..............21 JPWR1: 8-Pin 12V Power Connector ..............22 SATAPWR1: 4-Pin Power Connector ..............22 JSDOMPWR1: 2-Pin SATA DOM Power Connector ..........22 Cooling Connectors ....................23 FAN1~6: Fan Connectors ..................23 USB Connectors ......................
  • Page 4: Regulatory Notices

    Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://csr.msi.com/global/index CE Conformity Hereby, Micro-Star International CO., LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.
  • Page 5 Copyright and Trademarks Notice Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied.
  • Page 6: Safety Information

    The terms HDMI™, HDMI™ High-Definition Multimedia Interface, HDMI™ Trade dress and the HDMI™ Logos are trademarks or registered trademarks of HDMI™ Licensing Administrator, Inc. Safety Information ∙ Always read the safety instructions carefully. ∙ Keep this User’s Manual for future reference. ∙...
  • Page 7: Specifications

    Specifications Model D3052GB2N-25G Form factor Micro-ATX Dimensions 243.84 mm (9.6”) x 243.84 mm (9.6”) Processor Single AMD Ryzen™ 7000 Series Processor, TDP up to 170W 1 x AMD Socket AM5 Socket AMD B650 Chipset Chipset ∙ 2 x 25G SFP28 LAN ports Networking - Intel®...
  • Page 8 Model D3052GB2N-25G ∙ 1 x Front panel header ∙ 1 x SPI TPM header ∙ 1 x GPIO header ∙ 3 x I2C headers System Connectors ∙ 1x PMbus header ∙ 1 x COM port header ∙ 1 x Chassis intrusion header ∙...
  • Page 9: Overview Of Components

    Overview of Components Flash BAT1 BIOS Flash Overview of Components...
  • Page 10: Rear I/O Panel

    Rear I/O Panel GbE RJ45 LAN Port COM Port (for mgmt.) SFP28 LAN LED 25G SFP28 LAN Port UID LED Button HDMI™ VGA Port Connector USB 3.2 Gen 1 Type-A Port UID LED Button The UID (Unit Identification) button help users identify and locate a system, especially in high-density rack environments.
  • Page 11: Gbe Rj45 Port (For Mgmt.)

    GbE RJ45 Port (for mgmt.) Connect a specially configured RJ45 console cable to this jack for network routers/ switches to communicate with the system through a serial connection. Link/ Activity LED Speed LED Status Description Status Description No link 10 Mbps Linked Orange 100 Mbps Green...
  • Page 12: Block Diagram

    Block Diagram SATA 3.0 (x4) 4 x SATA Ports DDR5 Channel A Socket AM5 P4-7 2 x DIMM Slots (rear, W/ 1 x VCC) DIMMA1 SATA1~4 DIMMA2 SATA Controller PCIe (x1) ASM1061 DDR5 Channel B 2 x DIMM Slots SATA 2.0 DIMMB1 DIMMB2 2 x SATA Ports...
  • Page 13 Component Contents Component Page CPU Socket Memory Slots DIMMA1~2, DIMMB1~2: DDR5 DIMM Slots Storage Connectors SATA1~4: SATA 3.0 6Gb/s Ports SATA3_1: SATA 2.0 3Gb/s Ports M2_1: M.2 Slot (M Key, PCIe 4.0, 22110/ 2280) Expansion Slots PCIE_16, PCIE_4: PCIe Expansion Slots Power Connectors JPWR2: 24-Pin Main Power Connector JPWR1: 8-Pin 12V Power Connector...
  • Page 14: Cpu Socket

    CPU Socket Introduction to the AM5 CPU The surface of the AM5 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator. ⚠ Important Overheating will seriously damage the CPU and system.
  • Page 15: Cpu & Heatsink Installation

    CPU & Heatsink Installation Use appropriate ground straps, gloves and ESD mats to protect yourself from electrostatic discharge (ESD) while installing the processor. ⚠ Important Images are for demonstration purposes only; actual parts may vary. CPU Socket...
  • Page 16: Memory Slots

    Memory Slots DIMMA1~2, DIMMB1~2: DDR5 DIMM Slots DIMMA1 DIMMB1 Channel A Channel B DIMMA2 DIMMB2 Recommended Memory Population Quantity of DIMMs DIMMA1 Channel A DIMMA2 DIMMB1 Channel B DIMMB2 “V” indicates a populated DIMM slot. ⚠ Important Only support UDIMM. ∙...
  • Page 17: Installing Memory Modules

    Installing Memory Modules 1. Open the side clips to unlock the DIMM slot. 2. Insert the DIMM vertically into the slot, ensuring that the off-center notch at the bottom aligns with the slot. 3. Push the DIMM firmly into the slot until it clicks and the side clips automatically close.
  • Page 18: Storage Connectors

    Storage Connectors SATA1~4: SATA 3.0 6Gb/s Ports These connectors are SATA 6Gb/s interface ports, it can connect to SATA devices. SATA3_1: SATA 2.0 3Gb/s Ports These connectors are SATA 3Gb/s interface ports, it can connect to SATA devices. SATA4 SATA3 SATA2 SATA1 SATA3_1...
  • Page 19: M2_1: M.2 Slot (M Key, Pcie 4.0, 22110/ 2280)

    M2_1: M.2 Slot (M Key, PCIe 4.0, 22110/ 2280) Please install the M.2 solid-state drive (SSD) into the M.2 slot as shown below. ⚽ Video Demonstration Watch the video to learn how to Install M.2 SSD. M2_1 Installing M.2 SSD 1.
  • Page 20: Expansion Slots

    Expansion Slots PCIE_4: PCIe 5.0 x 8 slot (Gen 5 x 4 signal from CPU) PCIE_16: PCIe 5.0 x 16 slot (Gen 5 x 16 signal from CPU) PCIE_16, PCIE_4: PCIe Expansion Slots The PCI Express(Peripheral Component Interconnect Express) slots support PCIe interface expansion cards.
  • Page 21: Power Connectors

    Power Connectors JPWR1 JPWR2 JSDOMPWR1 SATAPWR1 JPWR2: 24-Pin Main Power Connector This connector allows you to connect an ATX power supply. +3.3V +3.3V +3.3V -12V PS-ON# JPWR2 PWR OK 5VSB +12V +12V +3.3V Power Connectors...
  • Page 22: Jpwr1: 8-Pin 12V Power Connector

    JPWR1: 8-Pin 12V Power Connector This connector allows you to connect an ATX power supply. P12V P12V JPWR1 P12V P12V SATAPWR1: 4-Pin Power Connector This connector is used to provide power to SATA devices. SATAPWR1 P12V JSDOMPWR1: 2-Pin SATA DOM Power Connector This connector is used to provide power to SATA DOM devices.
  • Page 23: Cooling Connectors

    Cooling Connectors FAN1~6: Fan Connectors The fan power connector supports system cooling fans with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. P12V FAN1~6 FAN_TACH...
  • Page 24: Usb Connectors

    USB Connectors JUSB1: USB 3.2 Gen 1 Header This port is backward-compatible with USB 2.0 devices and supports data transfer rate up to 5 Gbps. USB_VCC1 USB2_ESD_DP9 USB3_ESD_RX4N USB2_ESD_DN9 USB3_ESD_RX4P USB3_ESD_TX5P USB3_ESD_TX4N USB3_ESD_TX5N JUSB1 USB3_ESD_TX4P USB3_ESD_RX5P USB2_ESD_DN8 USB3_ESD_RX5N USB2_ESD_DP8 USB_VCC2 No pin JUSB2: USB 3.2 Gen 1 Type-A Port JUSB2...
  • Page 25: Other Connectors And Components

    Other Connectors and Components JFP1: Front Panel Header The front panel header is provided for electrical connection to the front panel switches and LEDs. PWR_LED+ FP_PWR SYS_ID_LED+ PWR_LED- SYS_ID_LED- HDD_ACT_LED+ SYS_FAULT_LED1- HDD_ACT_LED- SYS_FAULT_LED2- PWR_BTN NIC#1_ACT_LED+ JFP1 PWR_BTN_GND NIC#1_ACT_LED- RST_BTN SMB_SDA RST_BTN_GND SMB_SCL SYS_ID_BTN...
  • Page 26: Jtpm1: Spi Tpm Header

    JTPM1: SPI TPM Header This header connects to a TPM (Trusted Platform Module) (optional). Please refer to the TPM security platform manual for more details. No Pin SPI_LOC_ROM_CS_N CPU_RSMEST_L P1V8_AUX SPI_CPU0_CLK TPM_SPI_WP_N JTPM1 SPI_CPU0_HOLD_L SPI_CPU0_MISO SPI_CPU0_MOSI SPI_TPM_CS_N PVDD_P1V8_AUX IRQ_TPM_SPI_N P1V8_AUX TPM_RESET_N P1V8_AUX JCOM1: COM Port Header...
  • Page 27: Jgpio1: Gpio Header

    JGPIO1: GPIO Header This header is provided for the General-Purpose Input/Output (GPIO) peripheral module. USER_GPIO0 USER_GPIO1 USER_GPIO2 USER_GPIO3 JGPIO1 USER_GPIO4 USER_GPIO5 USER_GPIO6 USER_GPIO7 No pin JPMBUS1: PMBus Header Power Management Bus (PMBus) is a variant of the System Management Bus (SMBus) which is targeted at digital management of power supplies.
  • Page 28: Fp_I2C_1, Rbp_I2C_1~2: I2C Headers

    FP_I2C_1, RBP_I2C_1~2: I2C Headers I2C headers are used to connect to the System Management Bus (SMBus). FBP_I2C_1 is for front HDD backplane, and RBP_I2C_1, RBP_I2C_2 are for rear HDD backplanes. FP_I2C_1 I2C_CLK RBP_I2C_1 I2C_DATA RBP_I2C_2 JIPMB1: IPMB Header Intelligent Platform Management Bus (IPMB) header is used to connect various management components, such as Baseboard Management Controller (BMC).
  • Page 29: Jchassis: Chassis Intrusion Header

    JCHASSIS: Chassis Intrusion Header This header connects to the chassis intrusion switch cable. If the chassis is opened, the chassis intrusion mechanism will be activated. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record.
  • Page 30: Bat1: Cmos Battery

    BAT1: CMOS Battery If the CMOS battery is out of charge, the time in the BIOS will be reset and the data of system configuration will be lost. In this case, you need to replace the CMOS battery. Replacing CMOS battery 1.
  • Page 31: Jumpers

    Jumpers ⚠ Important Avoid adjusting jumpers when the system is on; it will damage the motherboard. JSEL_BMC1 JRTC_CLR1 Jumper Name Default Setting Description 1-2: Using CPU (Default) JSEL_BMC1 2-3: Using BMC 1-2: Normal (Default) JRTC_CLR1 2-3: Clear CMOS Jumpers...
  • Page 32: Onboard Leds

    Onboard LEDs BMC_LED1: BMC Heartbeat LED This LED indicates the BMC (Baseboard Management Controller) status. Status Description BMC is not activated BMC is functioning normally Blinking LED_H1, LED_L1: Port 80 Debug LEDs The Port 80 Debug LEDs display progress and error codes during and after POST (Power-On Self Test).
  • Page 33 EPS.MSI.COM MSI.COM...

This manual is also suitable for:

Ms-s3661

Table of Contents