Puls TP960.484 Manual

P
RODUCT DESCRIPTION
The TP960 series is the top of the line for 3-phase
power supplies for DIN rails from PULS. Size, efficiency,
and extra power capabilities have been even further
improved significantly compared to the renown
DIMENSION-Series.
PULS BonusPower enables the use with highly
dynamic loads with large power requirements, such as
drives.
The LED bar provides direct information on the output
power load of connected consumers.
The no inrush current peak design lowers the effort in
selecting connected system components.
The device is very robust in terms of back-feeding
events and thus helps to avoid downtimes. The
Hiccup PLUS mode makes installation and operation safe
and reliable.
The DC-OK and AC-OK relay contacts enable remote
diagnostics.
The quick connector push-in clamps can be used for
all types of wires, stranded with / without ferrules
and solid wire, and enable quick installation. The
approval package makes this device fit to a variety of
applications.
O
RDER NUMBERS
Power Supply TP960.484
All parameters are specified at 48 V, 20 A, 3x 500 Vac, +25 °C ambient and after a 5 minutes run-in time unless otherwise noted.
Aug. 2024 / Rev. 0.2 DS-TP960.484-en
P
OWER SUPPLY
Compact width: Only 79 mm
Efficiency 97 % at 48 V, 20 A
Power losses at no load: 3.1 W
Dynamic BonusPower management:
Max. 1920 W for up to 15 s and 1152 W continuous
(up to +45 °C)
Enhanced Hiccup
power supply from overload
Remote control of output voltage
AC-OK and DC-OK relay contacts
Active current share bus for constant output voltage in
parallel use
Output voltage adjustable in six steps
LED bar for visual monitoring the output power
S
HORT-FORM DATA
Output voltage
Adjustment range 48 - 56 Vdc
Output current
short term (15 s)
Derating
Input voltage AC
Input current AC
Power factor
Inrush current AC
Efficiency
Power losses
Hold-up time
Temperature range -40 °C to +70 °C
Size (w x h x d)
Weight
M
AIN APPROVALS
For details and the complete approval list, see chapter 26.
www.pulspower.com
3AC 48 V, 960 W
PLUS protects connected systems and
DC 48 V nominal
24 - 20.6 A up to +45 °C
20 - 17.1 A up to +60 °C
18.3 - 15.7 A at +70 °C
40 A up to +45 °C
linearly 12.8 W/K +45 °C to +60 °C
linearly 8 W/K +60 °C to +70 °C
3AC 380 - 500 V -15 / +10 %
1.53 / 1.24 A at 3x 400 / 500 Vac
0.91 / 0.94 at 3x 400 / 500 Vac
no inrush peak
97 / 97 % at 3x 400 / 500 Vac
30 / 30 W at 3x 400 / 500 Vac
29 / 29 ms at 3x 400 / 500 Vac
79x124x136 mm without DIN rail
1100 g
TP960.484
1 / 25