Advertisement
n. To ping the EMS node with the target IP address, select the 19. Ping tests option or highlight the
option and press the Enter key.
If the ping test fails, double check the IP addresses used and also the cabling. For more
information, see the Chapter 5, "Troubleshooting (SSR tasks)," on page 63.
o. Click Back and then click Exit. You are logged out automatically.
Before moving on, ensure that there are no faulty LED lights on this canister. If you face any issues, see
the Chapter 5, "Troubleshooting (SSR tasks)," on page 63 topic.
62 IBM Elastic Storage System 3000: Hardware Planning and Installation Guide
Advertisement
Need help?
Do you have a question about the Elastic Storage System 3000 and is the answer not in the manual?