Leds - TRENDnet TPL-401E2K User Manual

1.5 LEDs

The LED panel located on the front of the device consists of the status LEDs: Power (PWR),
Powerline (PL), and Ethernet Link/Act (ETH).
LED Color
Green
PWR (Power)
N/A
PL (Powerline)
Green
Note: LED color
indicates the
Amber
strength and
quality of the
powerline
Red
connection
through the
N/A
electrical system
Green
ETH
(Ethernet Port)
N/A
*Note: The following factors may affect the powerline network's connection quality:

Noise – Generated by appliances that are connected to your electrical system through power outlets that have high power
consumption requirements. (e.g. Microwaves, ovens, blow dryer, iron, dishwasher, etc.) The quality of your household
electrical wiring may also cause additional noise on your electrical system.

Distance – Long lengths of electrical wiring through your electrical system between connected powerline adapters.
Sequence
Solid
Off
Solid
Blinking Syncing or Powerline Data Transmitting/Receiving (Connection Quality is Best)
Solid
Blinking Powerline Data Transmitting/Receiving (Connection Quality is Better)
Solid
Blinking Powerline Data Transmitting/Receiving (Connection Quality is Good)
Off
Solid 10/20 Mbps, 100/200Mbps, or 1000/2000Mbps (Half/Full Duplex) Connected
10/20Mbps, 100/200Mbps, or 1000/2000Mbps (Half/Full Duplex) Data
Blinking
Off
Definition
Device powered On
Device powered Off
Powerline Connected (Connection Quality is Best)
Powerline Connected (Connection Quality is Better)
Powerline Connected (Connection Quality is Good)
Powerline is not synced or connected
Transmitting/Receiving
Port Disconnected/No Ethernet Link
Power (PWR)
Powerline (PL)
Ethernet Link/Act