Create A Powerline Network And Extend You Wireless Network - TRENDnet TPL-310AP User Manual

4.1

Create a powerline network and extend you wireless network

The following procedure describes how to create a basic powerline network between the TPL-
310AP and an additional TRENDnet powerline adapter model TPL-303E (or TPL-304E, TPL-305E,
TPL-401E) and share Internet connection through a router to a computer or network appliance in
another room.
The procedure assumes the following:
 You have one additional TRENDnet HomePlug® AV powerline adapter (models TPL-303E, TPL-
304E, TPL-305E, TPL-401E) and the powerline settings are set to factory defaults. If you have
an existing powerline network (2 or 3 other TRENDnet powerlines adapters already plugged
in and connected) and you are adding the TPL-310AP, please refer to section 4.5.
 The TPL-310AP has already been initially configured in (AP) Access Point mode to allow
wireless computers or devices to wirelessly connect covered in Chapter 2.
 Your router is already installed and configured for Internet connectivity.