1.2 Start to Manage This Switch
Either way user may start to manage this switch, web mode through Ethernet port or terminal
mode through RS232 port.
1,2,1 Web mode default setting are:
Default IP Address: 192.168.223.100
Default IP mask:
Default gateway: 192.168.223.254
Default Password: admin
1.2.2 Terminal mode default setting are: baud rate: 115,200, attribute: 8, None, 1, None
Terminal mode operation: (password: admin)
Once terminal is connected, the basic operation rule are shown below
Press " ? " to find root operation page, then choose command by typing little alphabets
After enter command page, Press " ? " to find command parameters and format,
and type " command ? " to get explanation.
Type " up " or "
255.255.255.0
/
" to go back to previous page
5