System Turn Off; System Charge - Lux Power Technology Single Phase All-in-one RESS Smarty Inspiration-S User Manual

All electrical connections must be made in accordance with the electrical diagrams in the manual; the DC
combiner box must be open; the cables are properly distributed, without mechanical damage, and
connected and fastened correctly; the internal protection devices in the combiner box must be firmly
installed; No excess parts or conductive material remains.
7.5.2 System Turn On
After completing the above steps, press the ON/OFF switch on the control panel to turn on the
machine, then turn on the miniature circuit breaker and turn on the power of the whole system
to complete the installation.
System turns on step:
(1) Double check all cables are connected correctly, and make sure the grounding is proper.
(2) Turn on the switch at inverter's battery side or between inverter and battery.
(3) Turn on the battery system.
(4) Turn on the inverter.

7.5.3 System Turn off

When failure or before service, must turn off the battery system, the procedure to switch it off is:
(1) Switch off the Hybrid inverter;
(2) Switch off the battery;
(3) Switch off the air switch between the battery and the inverter if there is any.

7.5.4 System Charge

When the battery system is transported or stored for a long time, the battery SOH may be low due
to self-discharge of the cells and system consumption, and the lithium battery needs to be charged after
normal start-up and before use.
22