Zebronics ZEB VOX PRO User Manual page 8

Optical In
Ÿ Connect the optical cable to the optical
digital output of your Source.
Ÿ Then connect the optical cable to the
optical digital input of your Speaker.
Ÿ Switch the Source device and Speaker
ON. Set the connected Source to "PCM Stereo"
or "Stereo 2.0".
Ÿ Start playing on the Source device.
Ÿ Press the "MODE" button on the remote
control to select this mode.
Ÿ
You can use the volume buttons to
adjust the volume to your requirements.
Ÿ
In this mode, playback can only be
controlled on your Source device.
Coaxial In
Ÿ Connect the Coaxial cable to the output
of your Source.
Ÿ Then connect the Coaxial cable to the
Coaxial digital input of your Speaker.
Ÿ Switch the Source device and Speaker
ON. Set the connected Source to "PCM Stereo"
or "Stereo 2.0".
Ÿ
Start playing on the Source device.
Ÿ Press the "MODE" button on the remote
control to select this mode.
Ÿ You can use the volume buttons to
adjust the volume to your requirements.
Ÿ In this mode, playback can only be
controlled on your Source device.