Zebronics ZEB VOX PRO User Manual page 7

General Instructions
BT Connectivity
Ÿ
Switch the source to BT mode.
Ÿ Turn on BT on your mobile and scan for
nearby BT devices.
Ÿ Tap on "ZEB-VOX PRO" to connect.
USB/SD Mode
Ÿ Insert the USB/SD card into the slot
provided on the speaker.
Ÿ The speaker will automatically detect the
USB/SD card and the supported audio content
will be played from it.
Note: This mode isn't selectable on the speaker or remote
control unless a USB/SD flash card is connected.
FM Radio
Ÿ
Switch the speaker to FM mode
Ÿ Long press the Play/Pause button to
scan the available FM channels.
Ÿ Once the scanning is done, the first
scanned channel will start playing.
AUX-In
Ÿ
The speaker can be connected to an
audio source using a 3.5 to 3.5mm cable.
Ÿ
Connect one end of the cable to the AUX-
In port on the speaker and the other end an
audio source.
Ÿ The audio from the source can be Played
through the speaker.