Playing Files Stored On Usb Memory Devices; Listening To Napster - Denon AVR-4310CI Owner's Manual

Playing Files Stored on USB Memory
Devices
Only USB memory devices conforming to mass storage class and
MTP (Media Transfer Protocol) standards can be played on the AVR-
4310CI.
1
Playback preparation.
q At "USB Select" (vpage 51), select the USB port to be
used.
w Connect the USB memory device to the USB port set in
q.
2
Press [SOURCE SELECT] to display the GUI Source
Select menu, then select " " (vpage 27).
3
Set the main remote control unit to the "NET/USB"
mode (vpage 89 "Operating the Main Remote
Control Unit").
4
Press to select the search item or folder, then
ui
press ENTER or .
p
5
Press ui to select the fi le, then press
Playback starts once buffering reaches "100%".
6
Adjust the items below.
Adjusting the master volume
n
Selecting the surround mode
n
n Adjusting the Sound and Picture Quality
(vpage 73)
To stop
n
(vpage 70)
Stopping playback temporarily
n
n Selecting tracks
(vpage 70)
Playing repeatedly
n
(vpage 70)
Playing in random order
n
(vpage 70)
n Searching pages
(vpage 70)
Searching by fi rst letter
n
(vpage 70)
• By default, the front panel's USB port will be used.
• Depending on the size of the still picture (JPEG) fi le, some time may
be required for the fi le to be displayed.
• During playback of still picture (JPEG) fi les, the fi les can also be
[TU d]
switched using
• If the USB memory device is divided into multiple partitions, only the
top partition can be selected.
• The AVR-4310CI is compatible with MP3 fi les conforming to "MPEG-
1 Audio Layer-3" standards.
[USB]
• When on the sub remote control unit is pressed, playback
starts from the fi rst fi le stored on the USB memory device.
NOTE
• The AVR-4310CI is equipped with two USB ports, one each on the
front and rear panels. It is not possible to use the set with USB
memory devices connected to both the ports at the same time.
Select the USB port you want to use at "USB Select" (vpage
51).
• DENON will accept no responsibility whatsoever for any loss or
damage to data on USB memory devices when using the USB
memory device connected to the AVR-4310CI.
• USB memory devices will not work via a USB hub.
• DENON does not guarantee that all USB memory devices will
operate or receive power. When using a portable USB connection
ENTER
or p .
type HDD of the kind to which an AC adapter can be connected to
supply power, use the AC adapter.
• It is not possible to connect and use a computer via the AVR-4310CI's
USB port using a USB cable.
• The AVR-4310CI is not compatible with the iPod shuffl e.
(vpage 70)
(vpage 71)

Listening to Napster

1
Playback preparation.
q Check the network environment, then turn on the AVR-
(vpage 70)
4310CI's power (vpage 23 "Connecting to a Home
Network (LAN)").
w If settings are required, make the "Network Connecting"
(vpage 39).
2
[SOURCE SELECT]
Press
Select menu, then select "
3
Set the main remote control unit to the "NET/USB"
mode (vpage 89 "Operating the Main Remote
Control Unit").
[TU f]
(previous fi le) and (next fi le).
to display the GUI Source
" (vpage 27).
Playing Network Audio, USB Memory Devices
4
Use to input "Username" and "Password".
ui p
Napster Account
Username
Password
OK
Enter Username
5
After inputting the "Username" and "Password",
ENTER
select "OK", then press .
If the "Username" and "Password" match, the top menu for
Napster is displayed.
n Username :
[Input characters]
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! # " $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜
(Space)
GNumbersH 0123456789
Password :
n
[Input characters]
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! # " $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ ` { | } ˜
(Space)
GNumbersH 0123456789
6
Adjust the items below.
n Adjusting the master volume
(vpage 70)
Selecting the surround mode
n (vpage 71)
Adjusting the Sound and Picture Quality
n
(vpage 73)
Search From Napster Menu
1
Use ui to select search item or folder, then press
ENTER
or p .
2
Use to select the track item, then press
ui
or .
p
Cancel
ENTER