Operation - Mofi MasterDeck Manual

Operation

Set the speed dial to the desired speed and press the
power button. The platter will start to spin and the
display will show the platter speed in orange as it
spins up to speed. The trim knob allows you to adjust
the speed from standard 33.3, 45 or/and up to 78
RPM. Each click of the trim knob changes the speed
by 0.1 RPM with a total range of approximately +/- 9
RPM. If the platter is stopped, it will restart at the
standard speed. Altered speeds are shown in the
display in blue.