Denon AVR-2112CI Owner's Manual page 98

Option Setup
Make various other settings.
Setting items
Volume Control Volume Display : Set how volume is displayed.
Set the MAIN ZONE (room • Relative : Display ---dB (Min), in the range –80.5 dB to 18 dB.
where the unit is located) • Absolute : Display in the range 0 (Min) to 99.
volume setting.
• The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume.
• OFF : Do not set a maximum volume.
• –20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
• Last : Use the memorized setting from the last session.
• – – – (0) : Always use the muting on condition when power is turned on.
• –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
• Full : The sound is muted entirely.
• –40dB : The sound is attenuated by 40 dB down.
• –20dB : The sound is attenuated by 20 dB down.
Source Delete BD / DVD / TV / SAT/CBL / GAME1 / GAME2 / V.AUX / DOCK /
Remove from the display NET/USB / TUNER / CD : Select input source that is not used.
input sources that are not • ON : Use this source.
used. • Delete : Do not use this source.
NOTE
• Input sources being used in the various zones
cannot be deleted.
• Input sources set to "Delete" cannot be
selected using the input source select button.
BD
Default settings are underlined.
Setting details
Setting items
GUI Screensaver : Make screensaver settings.
Make the settings related to • ON : The screensaver is activated during menu
displays on the TV screen. display, NET/USB, iPod or TUNER screen
display if no operation is performed for an
approximately 5-minute continuous period.
When you press
cancelled and the screen before that screen
saver started is displayed.
• OFF : Screensaver is not activated.
Format : Set the video signal format to be output for the TV you are using.
• NTSC : Select NTSC output.
• PAL : Select PAL output.
"Format" can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit's
seconds.
"V.Format:<NTSC>" appears on the display.
2. Press the main unit's
format.
3. Press the main unit's
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text : Display the details of operation when switching surround mode,
input mode, etc.
• ON : Turn display on.
• OFF : Turn display off.
Master Volume : Display the master volume during adjustment.
• Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
95
System Setup
Setting details
uio p
, the screensaver is
PRESET 1 PRESET 3
and for at least 3
TUNER PRESET CH +, –
and set the video signal
INTERNET RADIO
V to complete the setting.
vSee overleaf