Selecting The Dsp Surround Simulation - Denon AVR-2807 Operating Instructions Manual

Basic Operation
DSP
SIMULATION ENTER
<7CH STEREO>
D H F G <SURROUND BACK>
DSP SIMULATION
D H F G
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Selecting the DSP surround simulation

SURROUND
PARAMETER
1
[DSP SIMULATION]
Press
7CH STEREO
VIRTUAL
MATRIX
VIDEO GAME
The 7CH STEREO mode can be selected directly by
pressing <7CH STEREO>.
2
SURROUND PARAMETER
Press
3 D D H H
Press
set.
EFFECT: (WIDE SCREEN mode only)
Effect signals with the multi-surround speaker effects are
played. When set to "OFF", the SL/ SR channels are played
from the SBL/ SBR channels, respectively.
LEVEL: (WIDE SCREEN mode only)
Adjust the strength of effect signals "1" to "15".
SB CH OUT
SURROUND
• ON:
PARAMETER
Surround back channel played.
ENTER
• OFF:
Surround back channel not played.
This operation can also be performed using < SURROUND
BACK > .
ROOM SIZE:
Adjust the imaginary size of the recreated sound field space.
(Does not express size of room in which played.)
There are 5 parameters: "small", "med.s", "medium",
"med.l" and "large".
.
WIDE SCREEN SUPER STADIUM
ROCK ARENA
JAZZ CLUB
MONO MOVIE CLASSIC CONCERT
.
F F G G
to select the item, then press
33
EFFECT LEVEL:
Adjust the strength of the surround effect.
DELAY TIME: (MATRIX mode only)
Adjust the delay time between "0 ms" and "300 ms".
4
ENTER SURROUND PARAMETER
Press or
• Select "Default Yes" and press F F to reset all the settings.
to
Basic Operation
.