Do not overwet carpet. Use only on carpet moistened by the cleaning process. Read operator’s manual. Protection against moving parts. Use only BISSELL® cleaning formulas intended for use with this machine. Risk of fire. Risk of automatic start-up. Risk of electric shock.
Thanks for buying a BISSELL® CrossWave® We love to clean and we’re excited to share one of our innovative products with you . We want your CrossWave to work like new for the years to come, so this guide has tips on how to use, maintain and, if there’s a problem, troubleshoot .
Cleaning Formulas WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with the hard floor device. CROSSWAVE® FORMULAS Keep plenty of BISSELL® formulas on hand so you...
Water Tank. A few notes about fi lling the Clean Water Tank: • Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. BISSELL.com...
NOTE: When solution stuck-on messes while holding holding the trigger is flowing, you will see the trigger for best results. allows the multi-surface bubbles forming at brush to go to work. the edges of the Easy Remove Brush Window. BISSELL.com...
Page 8
Easy backward passes. holding the trigger. Remove Brush Window. ATTENTION Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure. BISSELL.com...
Dirty Water Tank. Water Tank top by pulling it up. Hand wash the vacuum filter and screen Rinse the float located at the bottom with warm water and mild detergent. of the Dirty Water Tank’s top. BISSELL.com...
Page 10
Dirty Water Tank. Then tilt the top of the Dirty Water Tank toward the machine and push into place until you hear a “click”. NOTE: Tanks are NOT dishwasher or microwave safe. BISSELL.com...
Page 11
Foot. Then with the edges of the foot. Then press lock the pull tab into place by pressing the window back into place until you hear downward. a “click”. BISSELL.com...
Page 12
Tray. Allow the machine to run for 10-15 the front of the window and pull upward seconds until all water is picked up. to remove. Repeat as needed. Pull Brush Roll out by grabbing the Brush Roll tab and pulling upward. BISSELL.com...
Page 13
Then press the window back into place until you hear a “click”. NOTE: Do NOTE: Any solution remaining in not place foot the Clean Water Tank should be directly under emptied prior to machine storage. running water. BISSELL.com...
Brush Roll and window to won’t turn ON remove the obstruction before plug- ging the machine back in for use. Machine is Cap of Clean Water Tank is not Remove the Clean Water Tank and leaking closed properly re-apply the cap BISSELL.com...
NOTE: Please keep your original sales receipt. It provides proof of the date of purchase in the event of a guarantee claim. See guarantee for details. Consumer Care If your BISSELL product should require service or to claim under our limited guarantee, please contact us as follows: Australia Telephone: 1300 247 735 Website: www.BISSELL.com.au...
Need help?
Do you have a question about the CROSSWAVE 2203F and is the answer not in the manual?
Questions and answers