Table of Contents
Advertisement
Getting Started
Installation
Connecting the Network Cable
Category 3, 4, or 5 UTP cable can be used to make an Ethernet connection to
your router.
Connecting the VoIP Gateway to a Computer
The DG-104SH requires a straight-through cable when connecting to a
computer. Make sure that your IP address on your Ethernet card is in the same
subnet as the DG-104SH, otherwise it will not connect.
Connecting the VoIP Gateway to a Hub/Switch
When connecting the LAN port to a Hub/Switch you will need to use a cross-
over cable.
8
Advertisement
Table of Contents
