Subscribe to Our Youtube Channel
Related Manuals for CARDIO STRONG BX50
Summary of Contents for CARDIO STRONG BX50
- Page 1 Assembly and Operating Instructions max. 150 kg ~ 60 Min. 39 kg L 108 | W 56 | H 139 FSCSTBX50.02.01 Art. No. CST-BX50-2 Exercise bike BX50 TF TF...
- Page 2 BX50...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Electrical Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly Instrument Setting 2.4.1 Horizontal Seat Adjustment 2.4.2 Vertical Seat Adjustment OPERATING INSTRUCTIONS Console Display Button Functions Turn on the Machine and fi rst Settings Programmes 3.4.1 QUICK START in the Manual Programme 3.4.2 Manual Mode... - Page 4 DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing WARRANTY CONTACT BX50...
- Page 5 Dear customer, thank you for choosing fi tness equipment from cardiostrong®. cardiostrong off ers high-quality home fi tness equipment that is optimally adapted to the conditions at home. Train at home no matter what the weather or time of the day. cardiostrong fi tness equipment off ers training programmes and a variety of equipment for all training levels and all training goals.
- Page 6 (person with legal responsibility). Class H (home use): use at home. These stationary training devices are intended for the use in private homes where access to the training device is regulated by the owner (person with legal responsibility). BX50...
- Page 7 Please pay close attention to the safety and maintenance instructions given here. The contract partner cannot be held liable for damage to health, accidents or damage to the equipment when it is not used in accordance with these instructions. The following safety instructions may appear in this manual: ATTENTION ►...
-
Page 8: General Information
Packaging dimensions (L x W x H): approximately 106 cm x 28 cm x 65 cm Set-up dimensions (L x W x H): approximately 109 cm x 54.5 cm x 138.5 cm Maximum user weight: 150 kg Use class: BX50... -
Page 9: Personal Safety
Personal Safety DANGER ⚠ Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly aff ected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. -
Page 10: Electrical Safety
Do not install any additional apps. NOTICE The pre-installed apps on TFT consoles are produced and provided by external manufacturers. Fitshop does not take any responsibility for the availability, functionality or contents of these apps. BX50... -
Page 11: Set-Up Place
Set-Up Place WARNING ⚠ Do not place the equipment in main corridors or escape routes. CAUTION ⚠ Choose a location in which to place the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment. The training room should be well ventilated during training and not be exposed to any draughts. -
Page 12: Assembly
To prevent damage to the equipment and the fl oor, assemble the equipment on a mat or packaging board. NOTICE In order to make the assembly as simple as possible, some screws and nuts to be used can already be pre-assembled. Ideally, assemble the equipment at its later set-up place. BX50... -
Page 13: Scope Of Delivery
Scope of Delivery The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly. CAUTION ⚠... - Page 14 BX50...
-
Page 15: Assembly
The assembly can also be found as a video under the following link: https://www.sport-tiedje.co.uk/cardiostrong-excercise-bike-bx50-cst- bx50-2#product-assembly. To go directly to the assembly video, you can alternatively scan the QR-code. Step 1: Mounting the rear stand... - Page 16 Remove the pre-assembled two screws (J6), two spring washers (J2) and two washers (J3) from the front stand (D). Attach the front stand (D) to the main frame (A) using the two screws (J6) previously removed, two spring washers (J2) and two washers (J3). BX50...
- Page 17 Step 3: Mounting the console mast Required tool: 6 mm Allen key Remove the screws (J4), spring washers (J12) and washers (J5) from the main frame (A). Connect the sensor cable (M1) and the sensor cable (M2). ATTENTION ► Be careful not to pinch the cables during the next step. Place the console mast (B) on the main frame (A).
- Page 18 Be careful not to pinch the cable during the next step. Place the handlebar (E) on the console mast (B). Attach the handlebar (E) to the console mast (B) using the nuts (J8) and washers (J9) previously removed. BX50...
- Page 19 Step 5: Mounting the console Required tools: Socket wrench and Multitool Remove the screws (G1) on the back of the console (G). Connect the cables (M2, M4 and M5) and the cable (M3) to the corresponding slots on the console (G). ATTENTION ►...
- Page 20 (F2) has been attached to the seat tube (F). Slide the saddle basement (F2) onto the seat tube holder (F). 10. Now remove the polystyrene. 11. Retighten the knob (F4). 12. Replace the previously removed bolt (J11) on the seat tube (F). BX50...
- Page 21 Step 7: Mounting the pedals Required tool: Multitool NOTICE The two pedals are marked with an „L“ for left and an „R“ for right. Mount the left pedal (K1) to the left crank arm of the main frame (A) by turning the pedal (K1) counterclockwise.
- Page 22 To get off , grip the handles with both hands and place one foot next to the equipment and then the other foot. BX50...
-
Page 23: Instrument Setting
Instrument Setting 2.4.1 Horizontal Seat Adjustment To move the saddle (H) forwards or backwards, fi rst loosen the knob (F4) a little and then pull it out. Move the basement (F2) on the seat tube (F) to the desired position. Snap the knob back in and tighten. -
Page 24: Operating Instructions
Have the proper use of this product explained to you by a specialist. Always start your training with low intensity and increase evenly and gently. End your training with a cool-down phase. If you are unsure, please consult your physician. Console Display BX50... - Page 25 The time counts from 00:00 to a maximum of 99:59 in Time 1-minute increments. Displays the current speed. Speed The maximum speed is 99.9 km/h or mph. RPM (cadence; rotations per Displays the rotations per minute. minute) Range from 0 to 999 RPM. Counts the total distance from 0.0 to 999.9 km or miles in Distance increments of 0.1kilometres or miles.
-
Page 26: Button Functions
Confi rm with ENTER. PROGRAMM MODE Quick key to enter program mode function. HEART RATE Quick key to enter heart rate control function. CONTROL WATT CONSTANT Quick key to enter Watt constant function. BX50... -
Page 27: Turn On The Machine And Fi Rst Settings
Turn on the Machine and fi rst Settings Connect the training equipment to the power and press RESET for two seconds. The LCD screen displays all segments for two seconds and a signal sounds (see fi g. 1). Go to the settings of calendar and time (fi g. 2 to 5). Set the time and the calendar with the UP/DOWN buttons. - Page 28 To choose the user (U) form 1 to 4, press the UP/DOWN buttons. Confi rm with ENTER (fi g. 6). Enter the user data for gender, age, height, and weight (fi g. 7 to 10). Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 BX50...
-
Page 29: Programmes
Programmes The programmes can be chosen as followed: MANUAL - PROGRAM - USER PROG - WATT - H.R.C. (fi g. 11 to 15). Fig. 12 Fig. 11 Fig. 13 Fig. 14 Fig. 15... -
Page 30: Quick Start In The Manual Programme
Increase or reduce the intensity level (from 1 to 6) with the UP/DOWN buttons. Confi rm with ENTER. Target values for TIME/DISTANCE/CALORIES/PULSE can be pre-set. To start the training, press START/STOP (fi g. 17). To return to the MANUAL mode, press RESET. 10. The resistance can be adjusted during the training. BX50... -
Page 31: Profi Le Programmes
3.4.3 Profi le Programmes After entering the PROGRAM mode (fi g. 18) you can choose one of the 12 hill programs with the UP/ DOWN buttons (fi g. 19 to 30). Confi rm with ENTER. NOTICE The TIME can be pre-set. Press START/STOP to start the training (fi g. - Page 32 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 BX50...
-
Page 33: User-Defi Ned Programmes
3.4.4 User-Defi ned Programmes Enter the USER PROG (PROGRAM mode, fi g. 32). When you entered the USER PROG (PROGRAM mode, fi g. 32) the fi rst section blinks (fi g. 33). You can increase or reduce the intensity level (from 1 to 6) with the UP/DOWN buttons for all the 20 sections. -
Page 34: Watt-Controlled Programme
In the H.R.C. mode (fi g. 38), the screen displays 55%, 75%, 90%, and TARGET (fi g. 32 to 35). Choose the preferred heart rate with the UP/DOWN buttons. BX50... - Page 35 NOTICE The time can be pre-set. To start the training, press START/STOP. After the training starts, the time is counted down. When zero is reached, the screen lights up and a signal sounds. To stop the signal, press any button. NOTICE ...
-
Page 36: Recovery
DELETE ALL! is displayed (fi g. 59). Confi rm with ENTER. → All data are deleted (fi g. 60). NOTICE The computer reboots after 15 seconds and returns to the calendar default 20170101. Fig. 46 Fig. 47 BX50... - Page 37 Fig. 49 Fig. 48 Fig. 51 Fig. 50 Fig. 53 Fig. 52 Fig. 55 Fig. 54...
-
Page 38: Check Or Delete Saved Data
DELETE ALL! is displayed (fi g. 59). Confi rm with ENTER. → All data are deleted (fi g. 60). NOTICE The computer reboots after 15 seconds and returns to the calendar default 20170101. Fig. 57 Fig. 58 Fig. 59 Fig. 60 BX50... -
Page 39: Battery Compartment
Battery Compartment The battery runs the calendar. If you want to set the calendar, remove the battery and restart the console (fi g. 61). Loosen the screw at the battery compartment. Remove the battery compartment coverage. Insert the battery and close the battery comparment by tighten up the screw again. NOTICE ... -
Page 40: Storage And Transport
After that, you easily can move the equipment to a new position. For long transport distances the equipment should be disassembled and safely packed. Select the new location by following the instructions in the section 1.4 of this manual. BX50... -
Page 41: Troubleshooting, Care And Maintenance
TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions ⚠ WARNING Do not make any improper changes to the equipment. ⚠ CAUTION Damaged or worn components may aff ect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. -
Page 42: Error Codes And Troubleshooting
The materials can be recycled as per their symbols. Through the reuse, recycling of materials or other forms of recovery of old equipment, you make an important contribution to the protection of the environment. BX50... -
Page 43: Recommended Accessories
RECOMMENDED ACCESSORIES To make your training experience even more effi cient and pleasant, we recommend that you add suiting accessories to your fi tness equipment. For exercise bikes this could for example be a fl oor mat, which makes your fi tness equipment stand more securely and also protects the fl oor from sweat or silicone spray to keep moving parts in good shape. -
Page 44: Ordering Spare Parts
The exact position of this sticker is shown in the following illustration. Enter the serial number in the appropriate fi eld. Serial number: Brand / Category: cardiostrong / exercise bike Model Name: BX50 Article Number: CST-BX50-2 BX50... -
Page 45: Parts List
Parts List Name Qty. Name Qty. Naam (ENG) Aan. Naam (ENG) Aan. MAIN FRAME FIX PLATE CHAIN COVER-L SPRING CHAIN COVER-R NUT M8 CRANK-L BEARING 6000 CRANK-R IDLER WHEEL END CAP IDLER WHEEL FRAME SCREW M8x12 WASHER M8 AXLE SCREW M4x13 BELT WHEEL Φ115mm KNOB MAGNET... - Page 46 WASHER M8 C CLIP ADAPTER WASHER Φ4XΦ8X1T NUT M8 NUT M4 SPRING WASHER M8 WASHER Φ3XΦ6X0.5T WASHER M8 SCREW M4X16 SCREW M8x12 ONE WAY BEARING WASHER M8 BUSH Φ10XΦ15.8X6mm SCREW M8x16 WASHER Φ30XΦ34X0.8T SCREW M8x105 WASHER Φ8XΦ19X2T NUT M8 BX50...
-
Page 47: Exploded Drawing
Exploded Drawing G1*4 A7*3 A26 A9 A7*3 N6 N7... -
Page 48: Warranty
Ownership of equipment or parts of equipment which have been replaced is transferred to us. The warranty period is not extended nor does a new warranty period begin following repair or replacement under the warranty. BX50... - Page 49 Warranty Conditions For the warranty to be valid, the following steps must be taken: Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance.
-
Page 50: Contact
Sie unserer Homepage: Sie unserer Homepage: https://stg.fi t/statit6 https://stg.fi t/statitb https://stg.fi t/statit9 Please fi nd a detailed overview including address and opening hours for all stores of the Fitshop Group in Germany and abroad on the following website: www.fi tshop.com/en/stores BX50... - Page 51 LIVE FITNESS WEBSHOP AND SOCIAL MEDIA Fitshop is Europe’s largest specialist store for www.fi tshop.co.uk home fi tness equipment with currently over 70 www.fi tshop.de/blog stores and one of the world’s most renowned online mail order companies for fi tness equipment.
- Page 52 Notes BX50...
- Page 53 Notes...
- Page 54 Notes BX50...
- Page 56 Exercise bike BX50 TF TF...
Need help?
Do you have a question about the BX50 and is the answer not in the manual?
Questions and answers