Using The Surface Units - GE JBP60BM2WH Owner's Manual And Installation Instructions

Using the surface units, ge.com
Throughout this manual, features and appearance may vary from your model.
off
Be sure you turn the control knob
to OFF when gou finish cooking.
How to Set
Pushthe knob in and turn in either direction
to the setting you want
At both Off and Hi the control clicks
into position You may hear slight clicking
sounds during cooking, indicating the control
is keeping the power level you set.
Indicator Lights
(on radiant glass models only)
A HOTSURFACE or HOTCOOKTOP
(depending on model)indicator light will glow
when any radiant element is turned on and
will remain on until the surface is cool
enough to touch.
A SURFACE UNIT on or BURNERON
(depending on model)indicator light will glow
when any surface unit is on
NOTE:TheSURFACE UNIT or BURNERON
indicator light may glow between the surface
control settings of Lo and Off, but there is no
power to the surface units
m
¢b
O"
m
¢b
Q
¢b
r_
vJ t_
_) _°
r_
v
0
,.._o
m
¢b
o
¢n
r_
"o
"o
o