D-Link DES-6000 User Manual page 98

Modular Ethernet Switch User's Guide
IGMP Settings
Figure 7-20. Configure IGMP window
To configure the IGMP, enter a value between 30 and 9999 seconds in the IP Multicast Filtering Age-out
Timer field and then change the IP Multicast Filtering (IGMP Snooping) setting from Disabled to Enabled.
Click the Apply button to let the changes take effect.
802.1Q IGMP
802.1Q IGMP allows you to adjust IGMP settings when 802.1Q VLANs are active on your network.
Figure 7-21. Add/Remove IGMP Entries window
Click the X in the Delete column next to an entry to remove it from the table.
Click the pointer icon or the New heading to access the Add/Remove IGMP Entries --- Edit window:
Web-Based Network Management 93