Related Manuals for Planet ME-561A
Summary of Contents for Planet ME-561A
- Page 1 V.92 56Kbps Internal/External Modem ME-561A ME-561R MI-560CS User’s Manual Version 1.0...
-
Page 2: Fcc Caution
Further, PLANET reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. -
Page 3: Table Of Contents
Table of Contents CHAPTER 1 INTRODUCTION......................1 1.1 P ........................... 1 ACKAGE ONTENT 1.2 F ............................1 EATURES 1.3 V ..................1 ERIFYING YSTEM EQUIREMENTS 1.4 G ..................1 ATHERING OOLS OCUMENTATIONS CHAPTER 2 HARDWARE INSTALLATION................2 2.1 LED ..........................2 DEFINITIONS 2.2 E .................. -
Page 4: Chapter 1 Introduction
Hardware CPU: 166MHz or Faster RAM: 64MB (Minimum) PCI Local Bus 2.1 or 2.2 compliant (MI-560CS) RS-232 port (ME-561A / ME-561R) Software Microsoft Windows 98/Me/NT/2000/XP/Server 2003 1.4 Gathering Tools And Documentations To install the adapter, you need the following items:... -
Page 5: Chapter 2 Hardware Installation
Chapter 2 Hardware Installation 2.1 LED definitions The faceplate of external modem has five LEDs: PWR, RD, SD. OH and TR. You may check those LEDs to know the operating status. PWR: Lights on to indicate the modem is power on. RD: Receive Data. - Page 6 Note: Please do not install the MI-560CS in a shared PCI slot. Avoid any PCI slot next to an ISA slot because this is often a shared slot and does not support bus mastering. You may refer to the mainboard manual to know which PCI slot share the resource with AGP slot and avoid using it as well.
-
Page 7: Chapter 3 Driver Installation
The driver installation below is for ME-561A, which is similar ME-561R and MI-560CS. They have to install with different driver, please make sure the selected driver file is correct during the installation. - Page 8 Select “Specify a location” and click “Next”. You can click “Browse” to specify the driver location. There are three sub-folders in the Drivers folder of provided CD-ROM. Please select the correct driver according to the model name of your modem. Click “OK” to continue. Windows will show this screen to prompt you that it finds a driver for the device you are installing, click “Next”...
-
Page 9: Windows Xp / Server 2003 Driver Installation
In the screen below, press ”Yes” to continue. Click “Finish” to complete the driver installation. (In Win98/Me, Windows will ask you restart your PC when driver installation finished.) 3.2 Windows XP / Server 2003 Driver Installation Note: The following installation operates under Windows XP. Procedures will be similar to Windows Server 2003. -
Page 10: Windows Nt Driver Installation
Please select “Include this location in the search” and then click “Browse” to specify modem driver location to install. There are three sub-folders in the Drivers folder of provided CD-ROM. Please select the correct driver according to the model name of your modem. Click “OK” to continue. - Page 11 When you are installing MI-560CS, please press “Have Disk” and locate the driver to E:\Drivers\MI-560CS\Win2000 (Assume “E” is your CD-ROM drive). Set the dial plan with the information your ISP provided. Note: We strongly recommend you to install the latest Windows NT4 Service Pack AFTER successful installation of the driver.
-
Page 12: Chapter 4 Specifications
Chapter 4 Specifications Model MI-560CS ME-561R ME-561A Interface PCI2.1/2.2 RS-232 RS-232 LEDs PWR, RD, SD, OH, TR PWR, OH, RD, SD, TR Cabling Requirements 2 pair, RJ-11 ITU-T V.92, V.90, V.34, V.32bis, V.32, V23, V.22bis, V.21, Bell Protocols 103/Bell212 Data Compression ITU V.44/V.42bis / MNP class 5...
Need help?
Do you have a question about the ME-561A and is the answer not in the manual?
Questions and answers