Hide thumbs Also See for 128B:

Advertisement

Quick Links

- ENGLISH - Brushcutter
Instruction manual
Original instructions
Caution! Before using this power tool for
the first time, please make sure that you read
these operating instructions and the separate
operating instructions for the engine carefully and
follow all the warnings and safety instructions.
All of the models in this range of high quality
brushcutters benefit from our new functional tool
design and are equipped with modern engines
supplied by renowned engine manufacturers.
The 130H is equipped with a four-stroke
Honda engine.
The
128L, 128B, 135L, 135B, 145Lnand 145B
models are all powered with a two-stroke
Kawasaki engine.
Observe the maintenance guidelines closely to
ensure the long service life of your equipment.
Your dealer will be glad to assist you with any
questions.
EC declaration of conformity  The EC
declaration of conformity on a separate piece of
paper forms part of these operating instructions.
Packaging and disposal
Please keep the original packaging in order to
protect the equipment against transport damage in
case you ever need to ship it or transport it. If the
packaging materials are no longer required then
they must be disposed of properly in accordance
with applicable local regulations. Cardboard
packaging materials are raw materials which can
be recycled or reused.
At the end of the equipment's service life, please
make sure that you dispose of it properly, in
accordance with the official directives and
regulations that apply in your area
In the best interest of continued technological
progress we reserve the right to change the design
and configuration of any product without prior
notice.
For that reason, no claims can be accepted with
reference to text and illustrations in this manual
128L / 128B / 130H / 135L / 135B / 145L / 145B
The following symbols are used in this manual and
on the product:
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Wear ear defenders and a face shield
before starting the engine
Wear protective gloves when handling
and working with the equipment
Wear solid shoes, preferably safety shoes
with a good tread
Always handle this power tool with
particular care
Please note: objects may be thrown out
and high
Please note: power tool may kick back on
contact with a solid object
Never smoke near the power tool or
where the equipment is refuelled!
Keep open flames away from the power
tool and the fuel can
- This equipment produces exhaust fumes
and
- fuel vapours are poisonous;
never start or refuel in enclosed spaces
Hint: First Aid
Hint: Medical implant
Type plate:
a: Type designation
b: Serial number
.
c: Build year (11  2011)
Symbols
Maintain a minimum distance of 15
metres bystanders
Never exceed the specified
maximum speed
ENGLISH 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 128B and is the answer not in the manual?

Questions and answers

Summary of Contents for Solo 128B

  • Page 1 - ENGLISH - Brushcutter 128L / 128B / 130H / 135L / 135B / 145L / 145B Symbols Instruction manual Original instructions The following symbols are used in this manual and on the product: Caution! Before using this power tool for...
  • Page 2 Index Page 1. Safety regulations ............................ 3  1.1  Correct use / General safety instructions 3  1.2  Working clothes 4  1.3  Fuelling 4  1.4  When transporting the equipment 4  1.5  Preparing the equipment for starting 5  1.6  Starting 5  1.7  Maintenance and repairs 5 ...
  • Page 3: Safety Regulations

    Safety regulations 1. Safety regulations 1.1 Correct use / General safety instructions The brushcutter must only be used to cut grass, reeds, weeds and wild growth at ground level. The brushcutter must not be used for any other purposes (see chapter 8.1 "Scope of Application"). Before using the tool for the first time, make sure that you read these operating instructions and the separate operating instructions for the engine carefully.
  • Page 4: Working Clothes

    This clothing should be practically oriented to the application (for example a tight fitting work suit), but should not be confining. We recommend: SOLO forest and countryside work jacket EN 340 Part no: 99303000 + size (2[s] - 6[xxl]) SOLO Outdoor Knee-breeches Part no: 9902095 + size SOLO Outdoor dungarees Part no: 9902094 + size Never wear scarves, ties, jewellery or other items of clothing, which might get caught in the equipment, in brush or on branches.
  • Page 5: Preparing The Equipment For Starting

    Safety regulations 1.5 Preparing the equipment for starting Check the complete machine for operational safety.  The stop switch should function properly.  The throttle must have freedom of movement and return to the idle position on its own accord. ...
  • Page 6: Working With The Machine

    Safety regulations 1.8 Working with the machine  Only use this power tool when it is complete and in a safe condition. As soon as the engine is running, the power tool generates toxic gases, which may be invisible and odourless.
  • Page 7 Brushcutter (engine  model-specific) 1 Stop-switch Model with "loop" handle Model with "bike" handle 2 Throttle lever (128L, 135L and 145L) (128B,130H, 135B and 145B) 3 Throttle lock 5a "Loop" handle 5b "Bike" handle 12 Strap attachment 135B 13 Anti-vibration system...
  • Page 8 Accessories 4. Accessories Via dealers, SOLO offers an extensive range of brushcutter accessories. Their use is limited to the particular model to which it is allocated, together with its relevant protection. Orientate yourself on the following table and check with your dealer.
  • Page 9 Preparing the equipment for use 5. Preparing the equipment for use B) "Bike handle" for models 128B, 130H, 135B and 145B Fig. 2b For shipping purposes, the brushcutter is partly disassembled and has to be reassembled prior to use. Only use the brushcutter after it has been fully assembled.
  • Page 10: Shield Installation

    Preparing the equipment for use 5.2 Shield installation Fig. 4a When assembling the guard, the damping inserts from the accessories pack must be fitted into the guard and mounting bracket in accordance with Figures 3a - 3e below. Fig. 3a ...
  • Page 11: Cutter Installation

    When the metal cutting blades are attached (4- cutting tools described below are available as tooth grass cutting blade or 3-tooth brush cutting genuine SOLO replacement parts which can be blade, provided either as standard equipment with obtained from specialist retailers and should be the different models or purchased as accessories), installed as described below.
  • Page 12 Preparing the equipment for use B) Assembly of the nylon line head Make sure that the Fig. 8b cutting teeth are correctly aligned in the Fig. 7 direction of rotation. Various washers are Fig. 8c supplied with the cutting head. For installation on this type of brushcutter, use exactly the washer...
  • Page 13: Shoulder Strap Adjustment

    2-stroke oil "SOLO Professional 2- shoulder strap retainer nearer the handle. stroke Engine Oil". Order no.: 1-litre pouring bottle 0083105 B) Models with a "bike" handle (128B, 130H, Fuel mixture table 135B and 145B) – double shoulder strap Petrol in Oil in litres Fig.
  • Page 14 7.3 "Starting". 7.1 A) Models with a Kawasaki engine Startup settings on the engine 128L, 128B, 135L, 135B, 145L and 145B When first starting or if the fuel tank has been The Kawasaki engine of your new brushcutter is...
  • Page 15: Turning Off The Engine

    Starting / Stopping the engine If the engine is running in part throttle operation:, 7.4 Turning off the engine: briefly pull the throttle back to release the half Release the throttle and push the stop switch to throttle detent. Release the throttle lever again to ”STOP”.
  • Page 16: Using Your Brushcutter

    Using your brushcutter 8. Using your brushcutter Operate the brushcutter at full throttle to obtain an optimum cutting result. Never operate with the clutch in slipping range. Consequential damage through excess loads or overheating is excluded 8.1 Scope of Application from our warranty.
  • Page 17: Engine Components

    Using your brushcutter; Operating and maintenance instructions Adjusting the cutting line It is best to store the equipment in a dry, safe location with a full fuel tank. There should be no When using a semi-automatic nylon head: open flame or similar nearby. When not using the Fig.
  • Page 18: Sharpening Instructions - Metal Cutting Blades (Subject To Model)

    It is preferable to check more frequently (e.g. before you start working) whether grease is still visible. Your SOLO dealer workshop is happy to help you in case of doubt. 9.5 Shutdown and storage (Diagram: 3-tooth brush cutting blade) Clean the power tool after use.
  • Page 19: Scheduled Maintenance

    Operating and maintenance instructions 9.6 Scheduled maintenance The following information is based on standard operating conditions. For special conditions, such as prolonged daily use, the recommended maintenance intervals should be reduced accordingly. Implement all maintenance jobs regularly. If required, authorise a specialist service centre to maintain the machine for you.
  • Page 20: Specification

    Specification 10. Specification Brushcutter 130H 128L 128B 135L 135B 145L 145B Engine type Honda single Kawasaki single cylinder two-stroke engine cylinder four- stroke engine Engine capacity 35.8 26.3 34.4 45.4 Bore / stroke 39 x 30 34 x 29 37 x 32 42.5 x 32...
  • Page 21 Guarantee; Parts subject to wear and tear 11. Guarantee 12. Parts subject to wear and tear The manufacturer guarantees trouble-free quality Various parts are subject to application-specific or and will cover the cost of replacing parts which are normal wear and must be replaced in good time, found to be faulty in material or workmanship when required.
  • Page 22 Made in Germany and Japan SOLO SOLO Postfach 60 01 52 P.O.Box 60 01 52 D 71050 Sindelfingen D 71050 Sindelfingen Germany Tel. 07031-301-0 Phone+49-7031-301-0 Fax 07031-301-130 +49-7031-301-149 info@solo-germany.com export@solo-germany.com...

This manual is also suitable for:

128l130h135l135b145l145b

Table of Contents