Subscribe to Our Youtube Channel
Related Manuals for Solo 106
Summary of Contents for Solo 106
- Page 1 Brushcutter Instruction manual Important! Read this instruction manual carefully before first operation and strictly observe the safety regulations! 9 106 103 english 11/2005...
- Page 2 Preface Symbols Dear Customer, The following symbols are used in this manual and on the product: Congratulations for choosing this SOLO quality product. Thoroughly read these operating The proven technology used in the Nikasil- instructions before undertaking any coated vertical cylinder 2-cycle engine guarantees maintenance, installation and cleaning high performance and low fuel consumption.
-
Page 3: Table Of Contents
Index Page 1. Safety regulations ........................4 General safety instructions Working clothes Fuelling When transporting the equipment Maintenance and repairs Preparing the equipment for starting Starting Working with the machine 2. Specification ..........................7 3. Standard delivery ........................8 4. Control and function elements ....................8 5. -
Page 4: Safety Regulations
To prevent injuries, always wear suitable clothing and safety equipment when working with this power tool. This clothing should be practically oriented to the application (for example a tight fitting work suit), but should not be confining. SOLO forest and countryside work jacket EN 340 Part no: 99 303 000 + size (2[s] - 6[xxl]) We recommend:... -
Page 5: Fuelling
Safety regulations 1.3 Fuelling Petrol is very light and highly flammable. Keep away from open flames and never spill fuel. Do not smoke at the operating site or at and near the refuelling site! • Stop the engine prior to refuelling. •... -
Page 6: Working With The Machine
Safety regulations 1.8 Working with the machine • Only use this power tool when it is complete and in a safe condition. As soon as the engine is running, the power tool generates toxic gases, which may be invisible and odourless. Never work with the power tool in enclosed spaces. -
Page 7: Specification
Specification 2. Specification Brushcutter 106L 106B Engine type SOLO single cylinder two-stroke engine Engine capacity Engine power kW at rpm 0,7 / 7500 Max. permissible speed 9000 no load with cutter Medium idling speed 2900 Fuel tank capacity Fuel mix ratio:... -
Page 8: Standard Delivery
Standard delivery ; Control and function elements 3. Standard delivery • Brushcutter partially assembled; the following components are supplied separately and require assembly • Handle subject to model and all parts required to complete the assembly • Shoulder strap (only model 106B) •... -
Page 9: Preparing The Equipment For Use
Preparing the equipment for use 5. Preparing the equipment for use The r.h. side of handle (5) should be fitted as near as possible to the handle support. For shipping purposes, the brushcutter is partly disassembled and has to be reassembled prior to use. -
Page 10: Shield Installation
Preparing the equipment for use A) Fitting the nylon head 5.3 Shield installation (subject to model) Fig. 7 Fig. 9 Insert both square nuts (18) from below into the contact protector (19). Fig. 8 • Position thrust piece (23) on gear shaf. •... -
Page 11: Shoulder Strap Adjustment
Preparing the equipment for use B) Fitting the grass cutter blade 5.5 Shoulder strap adjustment (subject to model) (subject to model) Before commencing work, adjust the shoulder strap Fig. 10 and handle according to the operator’s body size. Position the single shoulder strap over your l.h. shoulder, so that, after adjusting the strap length, the strap hook is located at your r.h. -
Page 12: Fuelling
(2) to be regulated. After that we recommend a ratio of 50:1 (2%) with the use of special two-stroke oil "SOLO 2T engine • Press throttle lever (2) fully down. oil" which we can supply. -
Page 13: Starting
Starting / Stopping the engine 7.3 Starting 7.4 Engine will not start: Observe the safety instructions when starting. If the engine fails to start after several attempts, check whether all adjustments described above have Fig. 13 been correctly carried out, particularly that the stop switch is not in the "OFF"... -
Page 14: Using Your Brushcutter
If in doubt, contact your local SOLO dealer. trimmed to the permissible length automatically (a line trimming blade is fitted into the shield). There is 8.2 Correct brushcutter operation... -
Page 15: Operating And Maintenance Instructions
There should be no still visible. open flame or similar nearby. For longer periods Your SOLO dealer workshop is happy to help you in without using the equipment (longer than four case of doubt. -
Page 16: Information About The Spark Plug
Operating and maintenance instructions Only qualified mechanics must adjust the 9.4 Information about the spark plug regulating screws for idle mixture "L" and Check the spark plug regularly after 50 hours of full load mixture "H". operation. Turn the idling end-stop screw "T" to adjust the •... -
Page 17: Air Filter Maintenance
Operating and maintenance instructions 9.7 Air Filter Maintenance 9.8 Replacing the fuel filter Dirty air filters cause a reduction in engine We recommend having the fuel filter (40) changed performance and increase fuel consumption with annually by a specialised service centre. more pollutants in the exhaust gas. -
Page 18: Scheduled Maintenance
Operating and maintenance instructions 9.10 Scheduled maintenance The following information is based on standard operating conditions. For special conditions, such as prolonged daily use, the recommended maintenance intervals should be reduced accordingly. Carburettor Check idling speed Adjust idling speed Air filter Clean Replace Spark plug... -
Page 19: Accessories / Spare Parts
• Obvious overload by continuously exceeding the maximum performance limit of the SOLO face/ear protection pack 99 390 1001 product. SOLO forest and countryside work 99 303 000 + • Using non-authorised tools. jacket EN 340 size (2[s] - 6[xxl]) •... - Page 20 Made in Germany SOLO SOLO Postfach 60 01 52 P.O.Box 60 01 52 D 71050 Sindelfingen D 71050 Sindelfingen Germany Tel. 07031-301-0 Phone+49-7031-301-0 Fax 07031-130 +49-7031-149 info@solo-germany.com export@solo-germany.com...
Need help?
Do you have a question about the 106 and is the answer not in the manual?
Questions and answers