Clover TFT2284C Instruction Manual page 21

1. Stand-by Power Mode Button
- Turn the LCD Panel (Screen) On or Off
- Even though the LCD Screen is turned off by pressing this button, the system will be
continued to work.
2. REC Key
- Press this key to start to record.
- In order to stop recording, click the REC button on the MENU Bar and the following message
will be appeared. Click the OK button.
3. MENU / ENTER Key
- This key along with (+), (-), and Exit key are used for Video enhancement on VGA output
(See section 7-8.2 for more detailed information).
4. EXIT Key
See section 7-8.2 for information.
5. TALK Key
See section 6-7.4.2 for information.
6. VOLUME / DATA (+) Key
- Used to increase Audio Volume for the system.
- See section 7-8.2 for additional information.
7. VOLUME / DATA (-) Key
- Used to decrease Audio Volume for the system.
- See section 7-8.2 for additional information.
8. BACK UP LED
- The red LED will blink when the system is in the copying mode.
9. PLAY LED
- The green LED will blink when the system is in the playing mode.
10. REC LED
- The red LED will blink when the system is in the recording mode.
11. TIMER LED
- The red LED will blink when the system is in the timer recording mode.
21
5. Installation