Table of Contents
Advertisement
System Instruction Manual
▫ Spot Setup
If the "ON" is selected by clicking the mouse on the SPOT button in the MOTION menu, a
full screen will display when a motion is detected. If the "OFF" is selected, the full screen
won't be displayed even though motion of objects is detected.
▫ Region
The Motion Detection Area displays in blue on the screen, and it turns to yellow color when
the motion is detected. The white color on the screen represents none of detection area.
There are three kinds of REGION settings as follows.
By All Set
Click the ALL SET button in the MOTION menu on each of the cameras and the Motion
Detection Area displays in blue on the screen as shown in
screen to return to the MOTION menu. The factory default value is the ALL SET.
[Fig.7-73 Spot Setup button]
[Fig.7-74 ALL SET button]
[Fig.7-75 All Set screen]
106
. Right-click on the blue
[Fig.7-75]
Advertisement
Table of Contents
