7-6.9. Recording By Motion Detection - Clover TFT2284C Instruction Manual

System Instruction Manual

7-6.9. Recording by Motion Detection

When the menu of motion properly setup (See section 7-6.3 for all the channels and this
section for each of the channels) and detects motion of objects, the system begins to
record automatically. The recording icon on the MENU bar should be selected in this
recording mode. If not, it won't be recording.
▫ Click the mouse on the
the MOTION menu will be displayed on the screen as shown in
▫ Click the (EXIT) button to return to the RECORD menu.
▫ ON/OFF
The system will start recording when MOTION is detected and the ON is selected in the
MOTION menu by clicking the mouse. If the OFF is selected, the system won't be
recording.
button for each of the channels in the RECORD menu and
[Fig.7-68 MOTION menu]
[Fig.7-69 MOTION ON/OFF button]
104
.
[Fig.7-68]