Features; Options In General; Usage - Linak TechLine LA25 User Manual

Features

• 12 V/24 V DC permanent magnetic motor
• Load from 600 N - 2�500 N in push and pull
• Speed from 2�5 to 25 mm/seconds depending on load and spindle pitch
• Stroke length from 20 - 600 mm
• Colour: Dark olive grey
• Protection class: IP66� Furthermore, the actuator can be washed down by a high
pressure cleaner (IP69K static)
• Heavy-duty aluminium housing for harsh conditions
• Built-in endstop switches
• Mechanical endstop
• Guided nut
• Static safety factor: 2�0
• Noise level: Max� 58�5 dB(A) at nominal voltage and with no load, according to
EN ISO 3743-1

Options in general

• Safety nut in push or pull (2�500 N version: only safety nut in push; 600 N version: no safety nut)
• Exchangeable cables in different lengths up to 10 m
• Steel or stainless steel back fixture and piston rod eye
• Special anodised housing for extreme environments
• Analogue and digital feedback for precise positioning
• IC Basic and IC Advanced
• I/O Basic, I/O Customised and I/O Full
• Limit switch principle
• Zero point principle
• CAN bus J1939
• CANopen
• LIN bus
• IO-Link
• Actuator Connect
™
• IECEx/ATEX certified for Zone 21

Usage

• Duty cycle is max� 20% (4 min� drive and 16 min� rest)
The duty cycles are valid for operation within an ambient temperature of +5°C to +40°C
• Ambient operating temperature: -40°C to +85°C (for IECEx/ATEX: T135 -25°C to +65°C;
T125 -25°C to +55°C ), full performance from +5°C to +40°C
• Storage temperature: -55°C to +105°C
(Zero Point: 100 to 600 mm)
and BusLink
LA25 User Manual | 8