Fortinet FortBranchSASE 10F-WiFi Quick Start Manual page 9

After you have connected the FortiExtender network interfaces, the device automatically

attempts to obtain an IP address from the DHCP server. If the device fails to obtain a

DHCP IP, it will be set to the default IP address of 192.168.1.2/24.

Alternatively, FortiBranchSASE 10F–WiFi (Model: FBS-10F-WiFi) comes with a

default wireless LAN management interface. You can log on to the interface at

http://192.168.200.99, using the device's serial number as the network SSID. You can

connect to it manually to access the device's GUI. It's a network with open security (no

password). We strongly recommend that you change the WiFi LAN security mode right

away.

To log in to the FortiExtender device, start the FortiExtender GUI, and in both the

username and password fields, type admin and press the Enter key on your keyboard.

Note:

If you are logging in to the device for the first time, you will be prompted

to change the default password. We strongly recommend that you change the

password right away.

FortiBranchSASE-10F-WiFi-QSG.indd 9

IP Configuration

5/9/2024 9:19:51 AM

Table of Contents

Need help?

Do you have a question about the FortBranchSASE 10F-WiFi and is the answer not in the manual?

Fbs-10f-wifi