Fortinet FortBranchSASE 10F-WiFi Quick Start Manual page 11

Mount on a wall
1. Peel off the drill template sticker, and stick it to a desired location on the wall.
2. Use the template to mark and drill the pilot holes.
3. Insert the anchors into the holes.
4. Insert the screws through the four mounting holes of the wall mounting bracket into
the anchors on the wall and tighten.
5. Hold the device facing you, slide it into the wall mounting bracket from right to left until
it locks.
FortiBranchSASE-10F-WiFi-QSG.indd 11 FortiBranchSASE-10F-WiFi-QSG.indd 11
11
5/9/2024 9:19:52 AM 5/9/2024 9:19:52 AM