Advertisement
Quick Links
Advertisement
Related Manuals for Fortinet FortiAP 112D
Summary of Contents for Fortinet FortiAP 112D
- Page 1 FortiAP 112D QuickStart Guide...
- Page 2 Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, https://support.fortinet.com except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that Toll free: 1 866 648 4638...
-
Page 3: Box Includes
Box Includes Before You Begin Write down details that you may need from your network administrator or ISP. DSL PPPoE FortiAP 112D Username Password QuickStart Guide FortiAP 112D QuickStart Guide Cable Modem DHCP It is normal to not require a hostname, but your ISP may require it. -
Page 4: Installation
Installation To mount the FortiAP unit on a pole IMPORTANT NOTE: The device must be professionally installed. The device can be mounted either outdoors or indoors and may be attached to either a 1. Loop the provided pole straps through the slots on the back of the device, then pole or wall. -
Page 5: Basic Connections
Basic Connections FortiAP Setup Internet Cloud provisioning with FortiCloud Controller or Internet FortiAP 112D FortiCloud PoE Injector Internet Power Network Port PoE Injector Adapter Note: PoE injector is not weatherproof and must be mounted indoors. Use the supplied weatherproof connector to ensure a tight seal around the cable. - Page 6 “Access Point Deployment” section of the Deploying Wireless Networks Guide found at http://docs.fortinet.com. 2. Plug your FortiAP into your local Ethernet connection. The FortiAP will self-configure. 1. Instead of preauthorizing, you can authorize your FortiAP via the FortiGate after you have connected the FortiAP to your local Ethernet.
- Page 7 LAN 2 LAN 1 Ground Lug Network Port (RJ-45) Grounding cable connection Gigabit Ethernet port for connection to your network FortiAP 112D or the Internet DC IN Power adapter connection 100-240V AC, 50-60Hz, 1.5A max AP/Bridge Port (RJ-45) 48V DC PoE output.
- Page 8 Cautions and Warnings Industry Canada (IC RSS) – Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not Environmental Specifications cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude).
- Page 9 Fortinet appliances and any stand-alone software provided to you by Fortinet, with the exception of any open source software Any disputes arising out of this Agreement or Fortinet’s limited warranty shall be governed by the laws of the state of California, without regard to the conflict of laws principles. In the contained in Fortinet’s Products which is discussed in detail in section 15 below, and the term “Software”...
- Page 10 copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients a) The modified work must itself be a software library. of the Program a copy of this License along with the Program.
- Page 11 Create a support account, register and manage your products, download updates, firmware images and release notes, and create technical support tickets. https://support.fortinet.com Fortinet Document Library Up-to-date versions of Fortinet publications for the entire family of Fortinet products. http://docs.fortinet.com Training Services Course descriptions, availability, schedules, and location of training programs in your area.
Need help?
Do you have a question about the FortiAP 112D and is the answer not in the manual?
Questions and answers