Page 4 of 38
Feature Implementation
Call Park
The Call Pickup Network Wide feature cannot be used to pick up parked
calls. A recall of a parked call can be picked up, in which case the call is
unparked and answered by the requesting party.
Called Party Name Display
Network Call Party Name Display information will be exchanged during Call
Pickup Network Wide calls if the sets involved in the call would normally
exchange the information for calls over the routes that have been used for the
original call and the call pickup. Conversely, if Network Called Party Name
Display would not operate for a normal call from the originating party to the
terminating party, the service will not be supported when Call Pickup
Network Wide is involved.
Name displayed on the requesting party
If a remote ringing station is picked up, the originating party's name is always
displayed, independent of the requesting party's Class of Service.
Call Redirection
Network Call Redirection
Call redirection only has an interaction if the call being picked up has already
been redirected. In this case, the original redirecting number will be passed
on instead of the DN of the set from which the call is being picked up. The
redirection reason displayed will remain as the previous displayed redirection
reason if the Called Party Name Display is involved.
Call Transfer
Network Call Transfer
A call may be picked up before or after the transferring party has completed
the transfer.
For pickup before transfer completion, the transferring party is displayed
updated information by the Call Pickup Network Wide feature when the call
is picked up. Then, when the transfer is completed, normal call transfer
information is exchanged by each party involved in the final call.
For pickup after call transfer completion, everything happens as if the call had
been made directly from calling to ringing party. After pickup is performed,
displays are updated as for normal Call Pickup.
P0884766
June 1998
Need help?
Do you have a question about the Meridian 1 Option 11C Compact and is the answer not in the manual?