Table of Contents
Advertisement
9. Select Save parameters and load driver after
configuring the adapter settings.
The NetWare server will now automatically load/bind the
driver.
If the driver files have already been copied to your system's
Netware directory and you simply wish to load them:
1. Start the NetWare Server by typing in the following
commands:
CD \NWSERVER
SERVER.
2. After booting up, type the following command:
NWCONFIG
3. Select "Driver Options" → "Configure network drivers"
→ Select a driver.
4. Select JT1ODI.LAN ... in the Select a driver windows.
5. Specify SLOT and Node Address if necessary.
6. Select Save parameters and load driver after
configuring the adapter settings.
The NetWare server will now automatically load/bind the
driver.
Next, you will need to modify your NetWare 5.0 Server's
Autoexec file. To do so, please follow these steps:
12
Advertisement
Table of Contents
