Table of Contents
Advertisement
Installation
Unpacking
CAUTION:
Under
ordinary
Gigabit Ethernet Card will not be affected by static
charge as may be received through your body
during handling of the unit. However, there are
special circumstances where you may carry an
extraordinarily high static charge, and possibly
damage the card and/or your computer. It is good
practice to eliminate all static electricity by touching
a ground (an unpainted metal area of your
computer chassis, for example) before performing
any installations.
Open the shipping carton and carefully remove all items. In
addition to this User's Guide, ascertain that you have:
•
One 1000Mbps Gigabit Ethernet Card Card.
•
One Software Driver diskette
Installing the Adapter
1. Shut down the computer, unplug its power cord, and
remove the chassis cover.
2. Insert the contact edge of the 1000Mbps Gigabit
Ethernet Card into the connector of any available PCI
Bus Master expansion slot. Press the card firmly into
the connector such that the card's contacts are fully
seated in the connector.
3. Install the bracket screw, which secures the card to the
computer chassis.
circumstances,
a
1000Mbps
8
Advertisement
Table of Contents
