TRENDnet TEG-ECSX. Manual page 2

Preface
Thank you for purchasing TEG-ECTX and TEG-ECSX. This
manual describes how to install and use the PCI Express Gigabit
Adapter. The PCI Express Gigabit Adapter allows you to use either
RJ-45 or fiber cable to connect to network.
The TEG-ECTX/TEG-ECSX is a high performance network adapter
that supports advanced management and power savings
functionality for system administrators. The TEG-ECSX has SC
type port allow you connects Multi-Mode fiber devices at distances
of up to 550m (1804ft.)
Full-Duplex technology generates data rates of up to 2Gbps over a
motherboard's high-speed PCI Express Bus architecture. Jumbo
Frame support further optimizes throughput performance.
Supports SNMP v1, Pre-Boot Execution Environment (PXE) 2.1,
and Wake-on-LAN (WOL, for TEG-ECTX only). Optimize
network performance with VLAN tagging and Layer 2 Priority
Tagging. Optimizes power consumption with advanced
Configuration Power Management Interface 2.0 (ACPI) technology.
-2-