Page 2
Table of Contents Table of Contents English ..................... 1 1. Before You Start ................2. How to Install ..................Troubleshooting ..................5 Version 01.26.2007...
2. How to Install 1. Shutdown your computer and then open your computer's case 2. Insert the PCI Card firmly into an available PCI slot, and then turn ON the computer and wait until the Windows desktop appears. Windows Vista/2003 Server Windows Vista/ 2003 Server will automatically detect and install the appropriate...
4. Insert the Driver CD-ROM into the CD-ROM drive, select Install the software automatically (Recommended) and then click Next. 5. Select the proper drivers and then click Next. 6. Click Finish. Skip to Step 12. Windows 2000 7. The Found New Hardware Wizard appears.
Page 6
9. When Locate Driver Files appears, click Specify a location and then click Next. 10. Insert the Driver CD-ROM into CD-ROM drive, type in E:\WIN2000, and then click OK. Note: E represents the drive letter assigned to your CD-ROM drive. 11.
Cables. Some CAT-5 cables are not rated to run in Gigabit. Second, check the switch to make sure it is a 1000Mbps switch. If you still encounter problems or have any questions regarding the TEG-PCITXR, please contact Trendnet's Technical Support Department.
Page 8
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Need help?
Do you have a question about the TEG-PCITXM2 and is the answer not in the manual?
Questions and answers