TRENDnet TEG-ECTX Specifications

FEATURES
Gigabit PCI Express Adapter
TEG-ECTX (V1.0R)
The Gigabit PCI Express Adapter is a high performance network adapter
that supports advanced management and power savings functionality for
system administrators.
Full-Duplex technology generates data rates of up to 2Gbps over a
motherboard's high-speed PCI Express Bus architecture. Jumbo Frame
support further optimizes throughput performance.
Supports SNMP v1, Remote Program Load (RPL) and Wake-on-LAN
(WOL). Optimize network performance with VLAN tagging and Layer 2
Priority Tagging. Optimizes power consumption with advanced
Configuration Power Management Interface 2.0 (ACPI) technology.
• 1 x 10/100/1000Mbps Auto-MDIX WAN port
• PCI Express 1.0a compliant
• Incorporates Advanced Configuration Power Management Interface (ACPI) 2.0
• Wake-On-LAN (WOL)
• TCP segmentation / large send offload
• IEEE 802.1Q VLAN tagging and IEEE 802.1p Layer 2 priority tagging
• IEEE 802.3x full-duplex Flow Control
• Microsoft NDIS5 (IP, TCP, UDP) checksum off-load
• SNMP v1 and Remote Program Load (RPL) supported
• Jumbo Frames up to 7K
• Intuitive cable diagnostic utility
• 5-Year Warranty
gigabit
TEG-ECTX
rev:09.23.2008