TRENDnet TEG-ECSX Datasheet

FEATURES

Gigabit Fiber PCI Express Adapter
TEG-ECSX (V1.0R)
The Gigabit Fiber PCI Express Adapter is a high performance fiber
network adapter that supports advanced management and power saving
functionality and connects Multi-Mode fiber devices at distances of up to
550m (1804ft).
Full-Duplex technology generates data rates of up to 2Gbps over a
motherboard's high-speed PCI Express Bus architecture. Jumbo Frame
support further optimizes throughput performance.
Supports SNMP v1 and Remote Program Load (RPL). Optimize network
performance with VLAN tagging and Layer 2 Priority Tagging. Optimizes
power consumption with advanced Configuration Power Management
Interface 2.0 (ACPI) technology.
• 1 x 1000Base-SX SC-type Multi-Mode fiber port
• PCI Express 1.0a compliant
• Incorporates Advanced Configuration Power Management Interface (ACPI) 2.0
• TCP segmentation / large send offload
• IEEE 802.1Q VLAN tagging and IEEE 802.1p Layer 2 priority tagging
• IEEE 802.3x full-duplex Flow Control
• Microsoft NDIS5 (IP, TCP, UDP) checksum off-load
• SNMP v1 and Remote Program Load (RPL) supported
• Jumbo Frames up to 7K
• Intuitive cable diagnostic utility
• 3-Year Limited Warranty
gigabit
TEG-ECSX
rev:06.30.2010