Page 1
Model No.:MDS330N1 3.0L Stainless Steel PRO FRYER INSTRUCTION MANUAL Important: please read these instructions carefully before first using this product and retain for future reference.
BEFORE USE 1. First read carefully all instructions before use and retain for later reference. Before first use, remove the packing materials; and remove the protection films on the lid and outer case. 2. Remove Lid (1); then basket (2) and fold out its handle (3) until it clicks firmly into place.
Safety cut-outs This fryer is equipped with an automatic and a manual cut-out, which will switch the machine off if it overheats for example when there is insufficient oil or fat are in the fryer. Carry out the following steps if either of these safety cut-outs has switched off the appliance: 1.
Page 4
- Never immerse the control and heating element in water and don’t clean these parts under running water. - Never switch on the deep fryer if it is not filled with oil or liquid fat - Only use oil or fat that does not foam and is suitable for frying Hot surface: The temperature of the metal surface liable to get hot when the appliance is operating.
Page 5
positioned to avoid spillage of the hot liquids. HOW TO OPERATE YOUR DEEP FRYER This type of fryer may only be used with oil or liquid fat, and is not suitable for use with solid fat. Solid fat may contain water, which can cause hot fat to be sprayed out when heated.
has completely cooled off (at least 4 hours), you can replace the basket in the appliance and store it. Store the deep fryer, with the lid closed, in a dark, dry place. In this way, you can leave the oil and the basket in the deep fryer when storing. FRYING TIPS Use a maximum of 200 grams of French fries per litre of oil;...
- Dishwasher cleaning is not recommended. Operating voltage Model Volume Power MDS330N1 3.0L 220-240V~,50/60Hz,1830-2180W DISPOSAL The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Page 8
with N or coloured Blue. The wire which is coloured Brown must be connected to the terminal which is marked L or coloured Brown. The wire which is coloured Yellow & Green must be connected to the terminal indicated E or Symbol...
Need help?
Do you have a question about the MDS330N1 and is the answer not in the manual?
Questions and answers