Installation Procedure - Motorola WIRELESS CAR KIT WITH BLUETOOTH HF850 Manual

• Mount components securely on strong surfaces
to prevent shifting that could cause injury or
interfere with safe vehicle operation. Always use
the supplied mounting hardware
• Mounted components and attached wires or
cables must not interfere with seating or leg
space.
• Route cables so they are protected from pinching,
sharp edges, and crushing. Keep all in-line
connectors easily accessible.
• This car kit is intended for use in 12 volt negative
ground systems only. The car kit draws less than
3 amps.
Confirm that the vehicle's electrical system can
supply this current.

Installation Procedure

Caution: This car kit must be connected to a maximum
5A fuse in the car fuse panel to prevent fire or other
damages if a short circuit should occur somewhere in
the Junction Box.
Before installation, unpack, assemble, and test all
components on a service bench.
Installing the Bluetooth
Mount the box using the screws provided.
®
Junction Box
5