Related Manuals for Lekkie PACEMAKER
Summary of Contents for Lekkie PACEMAKER
- Page 1 Doc-V1.3 lekkie Bling PAceMAkeR useR guide www.lekkie.Tech...
-
Page 2: Parts List
1x lekkie PACeMAker throttle AND GriP 1x lekkie loCk-oN GriP lekkie Bling PAceMAkeR useR guide www.lekkie.Tech... -
Page 3: Installation
• remove exiting grips • ensure there is enough free space on the bar. the Pacemaker has been designed with a super-low profile so you can run most standard shift levers on the RH side. • Allow at least 150mm on the rh bar end for the throttle, and 130mm on the lh for the Grip mounting. -
Page 4: Troubleshooting
- test Before riding For your own safety, it is important to ensure your throttle is correctly installed. the Pacemaker functions exactly the same as a motorcycles throttle, mounted on the right hand of the handlebar ,twisting the throttle towards you increases the throttle signal. -
Page 5: Maintenance
3. Apply a small amount of Grease to the inner surface at the base of the grip, twist to release. repeat on of the replacement grip. opposing side as required. 4. Clip the grip into the throttle mechanism, orienting with the locating lug. lekkie Bling PAceMAkeR useR guide www.lekkie.Tech...
Need help?
Do you have a question about the PACEMAKER and is the answer not in the manual?
Questions and answers