Gateway Wi-Fi Kit; Gateway Wi-Fi Connected To Magis M; Description Of Main Window (Fig. 41); Operating Mode Selection - Immergas SMARTECH PLUS Instructions And Warnings

3

GATEWAY WI-FI KIT.

3.1 GATEWAY WI-FI CONNECTED TO MAGIS M.

The operation of the Wi-Fi Gateway with the Magis M generator allows you
to have remote control via the App so that it is possible to thermoregulate
the room of your home or manage the temperature of the DHW.
Note: the calendars can be set from the control panel of the Magis M
generator.
Note: any commands sent via Smartphone can be indicated on the generator
display with a few seconds delay.

3.1.1 DESCRIPTION OF MAIN WINDOW (FIG. 41).

41
11
1
6
Ref.
1
2
3
4
5
6
2 3
7
8
9
10
11
Note: in order to fully exploit the functioning of the Wi-Fi Gateway Kit, the
reading of the room temperature from the Magis M remote panel must not
be disabled (modification possible from the installer menu). Consequence
4
of the absence of references to be able to carry out temperature control.

3.1.2 OPERATING MODE SELECTION.

5
The buttons (Ref. 1, Fig. 41) allow you to select the following operating
modes: OFF, Summer, Winter, Cooling.
• Off mode (
only the emergency functions performed by it are guaranteed.
• Summer mode (
domestic hot water excluding space central heating.
• Winter mode (
domestic hot water and for space central heating. The room temperature
7
is maintained constant at the set value.
• Cooling mode (if applicable) (
enabled for the production of DHW and to check the cooling of the room.
Note: after selecting an operating mode, wait for the symbol to turn red
confirming that the generator has received the command.
Note: since the installer has the possibility of disabling one of the operating
8
modes described from the Magis M remote panel (except the OFF mode)
for a better operating experience of the Wi-Fi Gateway Kit, it is strongly
recommended to keep all the modes enabled (this enabling is carried out
in the installer menu of the Magis M remote panel). For further details, see
the Magis M remote panel manual.

3.1.3 ROOM TEMPERATURE SETTING.

To set the desired room temperature, simply rotate the knob (Ref. 7, Fig.
9
41) on the main window. This window will show, in real time, the set room
temperature (Ref. 8, Fig. 41).
It is possible to select any room temperature from +17°C to +30°C. This
10
setting will be kept constant until new adjustments are made or until a
different operating mode is selected.
28
Description
Operating mode (STAND-BY / DHW / DHW +
COOLING / DHW + C.H.).
List and selection of connected devices (max. 18
devices).
Windows selection button (CONFIGURATION /
INSTRUCTIONS AND WARNINGS / ADD NEW
DEVICE / LOGOUT).
Central heating or cooling demand in progress.
Measured room temperature display.
Displays current weather forecast and outdoor tem-
perature.
Knob to set room temperature.
Intended temperature set display
Access button to adjust DHW set
Faults display (not available for generators connected
to room thermostat).
Manual update of the data.
). In this mode the Magis M generator is turned off and
). In this mode the system is enabled for producing
). In winter mode the system is enabled for producing
). In cooling mode, the system is