HOMCOM FRO2718-50 Instruction Manual page 10

: Window detection function
- Press this button to turn on the 'window detection' function.
- If the room gets colder due to open windows or doors while the heater is
on, it will automatically stop heating to save energy.
- The corresponding icon on the screen will flash.
- Press the button again to turn off the 'window detection' function –
normal heating will resume.
: Reset function – press this button to clear the timing settings.
: Heating function – press this button to turn on the heating function.
Press again to turn it off.
: Timer function – press this button to turn on the timer function. Press
again to turn off.
Note: When using the timer function, the machine will work based on the
settings chosen before activating the timer. Adjust the desired settings,
activate the timer and the machine will adhere to these settings during the
specified period.
: For flame effect function - Press this button to change flame color. There
are ten types of flame effect: Yellow, blue, red and multi-colour Hold the
button for about 3 seconds to decrease the flame intensity. There are 5
light intensities for your selection. The flame optics will go lower under
the sequence of 5, 4, 3, 2 and 1. Pressing the button again will go higher
under the sequence of 1, 2, 3, 4 and 5.
: Press this button to change top light effect. There are seven types of top
light effect: Yellow, blue, red and multi-color.
NOTE: After the display screen is turned off, it can be activated by
pressing any button.
NOTE: In the absence of the timing mode, you can press + or - to select
the desired temperature. Once the desired ambient temperature is
reached, the heater will automatically stop heating.
Maintenance:
WARNING: Before performing any maintenance or cleaning, turn off and unplug
the appliance to reduce the risk of fire or electric shock. It is recommended to have
maintenance tasks carried out by a qualified technician.
Cleaning:
CAUTION: Before cleaning, wait for the appliance to completely cool down.
Cleaning glass panel:
- Use a dry cloth to remove dust.
- Use a damp cloth to remove fingerprints and other marks from the glass door.
- Do not use abrasive cleaners or liquid sprays on glass door surfaces.
- Clean metal and metal-painted parts with a damp cloth only. Do not use abrasive
cleaners or liquid sprays on these surfaces.
9