Daewoo DT- 4280NH User Manual page 48

3
Press the Volume " VOL " Buttons.
• Press the Volume " VOL " buttons to enter the
PR
• While you are in 'Screen' mode, press the
V
V
MENU
O
O
L L
PR
sub menu "Screen".
" " or " " button to select a desired
PR PR
item, and then, adjust the value by pressing the
" VOL" or "VOL " .
H. Size
V. Size
Picture
H. Position
Sound
V. Position
Phase
Screen
Frequency
Features
Install
Move Adjust
NOTES:
1) Horizontal/Vertical size and position values can be adjusted only in the
[PC] input mode and in the [DVI] input mode, only Horizontal/Vertical size
are available.
2) H. Size: As the value increases, the screen width increases
3) V. Size: As the value increases, the screen height increases.
4) H. Position: As the value increases, the screen moves to the right.
5) V. Position: As the value increases, the screen moves up.
6) Phase: When there is jitter or blurring of the image, adjust this value.
7) Frequency: When there is jitter or blurring of the image, adjust this value.
8) In case of DVI, only H and V size can be adjusted.
9) Using Screen Size button on the remote control, you can control the H
and V size directly in PC or DVI mode.
32
32
32
32
32
32
Exit
MENU
49