Selecting Picture Mode - Daewoo DT- 4280NH User Manual

1

Selecting Picture Mode

• Press the [PICTURE MODE] on the
PICT
MODE
• While pressing the [PICTURE MODE] for
Each Press of the Button Will Select
2
One of Four Picture Modes.
PICT
MODE
Normal
* Normal :
* Dynamic: For a clear-cut image emphasizing high contrast
* Cinema:
* User:
3
Menu on the Screen will disappear.
NOTES:
1) Normal, Dynamic, and Cinema Modes are factory preset values.
2) When adjusting sub-menus while you are in Normal, Dynamic,
and Cinema Modes, the Picture Mode will be automatically
converted to User Mode, and the adjustments will be made.
3) Selecting [Initialise] in the [Features], Menu will allow the
Brightness, Contrast, etc. to return to the factory preset values.
Selecting Picture Mode
Remote Control.
the first time, the current PICTURE MODE
will be displayed.
• Each time you press the button, a
different Picture mode appears. The
sequence used is as follows:
Dynamic
For a highly defined image in a normally bright
room
for sports viewing
For a movie
Allows the user to customise settings as desired.
• After selecting a desired Picture mode, the
menu on the screen will disappear.
• Normal, Dynamic, and Cinema Modes are
factory preset values.
If you want to customise the Picture modes,
refer to the following page.
Cinema User
Selecting Picture
Mode
• Select the Picture mode
that is appropriately set
depending on the kinds
of pictures, and enjoy
them.
TV VCR/DVD SAT CATV
RECALL STILL
MULTIMEDIA
PR
V V
MENU
O O
L L
PR
SLEEP
?
X
PICT. SOUND
MODE MODE I-II
F.R/SLOW PLAY F.F/SLOW STOP
OPEN/
PREV CLOSE NEXT PAUSE
43