Fitting The Embroidery Frame To The Machine; Removing The Embroidery Frame - Brother PE-180D User Manual

Fitting the embroidery frame to the machine

Removing the embroidery frame

22
1. Raise the presser foot to its highest position. Then pass the
embroidery frame under the presser foot with the mounting
pins on the right side and the fabric right side up.
1 Frame holder
2 Pins
2. Align the two pins on the embroidery frame with the frame
holder, and then insert the frame into the frame holder until
a click is heard.
* Be sure to insert both pins. If only the forward or the back
pin is inserted, the pattern may not turn out correctly.
1 Frame holder
2 Pins
Push the release lever to the right and remove the embroidery
frame by pulling up.
1 Release lever