Advertisement
Quick Links
System Firmware Update Instructions for Model BD-SP353 using a USB memory device
NOTE:
If you have any difficulty carrying out these instructions, please first refer to the System Firmware Update FAQ included in this document.
A) Check the current firmware version of the player:
Using the player's remote control:
1.
Press the "STANDBY/ON" button to switch the unit on.
* If the player starts to play a disc, press the "STOP" button and wait until the ONKYO logo is displayed on your TV.
2.
Press the "Home Menu" button to display the "HOME MENU".
3.
Select "System Information" using the left/right cursor.
4.
The firmware version of your player will be displayed on the TV screen.
If the version number is
If the version number is less than V01.06, it is necessary to update the firmware. Please continue to section B.
B) Download the system firmware ZIP file from Onkyo website:
1.
Download the file named "BD-SP353_V01.06.zip" from the website to a folder on your computer.
C) Preparing a USB memory device for the System Firmware Update:
1.
Have your USB memory device ready.
Requirements of your USB memory device:
- USB specification 2.0.
- 128 MB or more in capacity.
- Should not contain any files.
2.
Connect your USB memory device to your computer.
3.
Double click the downloaded ZIP file "BD-SP353_V01.06.zip" to open it.
4.
Unzip it and save the files named "BD-SP353_V01.06.bin", "DVD.bin" and "DLdiscidentifier.txt" to a folder on your
computer.
5.
Copy the all of files to your USB memory device.
6.
Confirm the file name and the file size are correct on your USB memory device:
To check the file size in Microsoft Windows, select the file, press the right mouse button, and select "Properties". If the file name
and size do not match the ones listed below, perform sections B and C again.
BD-SP353_V01.06.bin
DVD.bin
DLdiscidentifier.txt
* If the correct file is not copied to your USB memory device, your player will not recognize it as an update USB memory device and
you will not be able to carry out the update.
BD-SP353
V01.06
or higher, it is not necessary to update the firmware.
38.6 MB (40,522,708 byte)
1.00 MB (1,048,576 byte)
25 byte
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Onkyo BD-SP353
Summary of Contents for Onkyo BD-SP353
- Page 1 Press the “STANDBY/ON” button to switch the unit on. * If the player starts to play a disc, press the “STOP” button and wait until the ONKYO logo is displayed on your TV. Press the “Home Menu” button to display the “HOME MENU”.
- Page 2 A: Unplug the power cord then plug the power cord back in. Power on the player and try again starting at section D. If the player does not start up, the player will need repairs. In such an event, please contact to Onkyo Customer Support Center.
Need help?
Do you have a question about the BD-SP353 and is the answer not in the manual?
Questions and answers