Using The File Memory; Storing A Label Into Memory - Brother P-Touch PT-2100 User Manual

USING THE FILE MEMORY

You can store up to 9 of your most frequently used labels in the file memory. Each label
is stored as a file, allowing you to quickly and easily recall your label when needed
again.
• When the file memory is full, each time you save a file you will need to overwrite one of your
stored files.
• You will lose your stored files if the AC adapter is disconnected and the batteries are removed
for more than two minutes.
After entering the text and formatting the label, press
1
the key to display the File screen.
Select "Save" using the
2
Press the
3
A file number is displayed.
A label text is also displayed if a label is already stored
in that file number.
Select a file number using the
4
press the
selected file number.
The file is saved and the screen returns to the text
entry screen.
When there is already a stored file in the selected
number, the data will be overwritten by the file you try
to save.
• Press the
• Up to 200 characters can be saved in one file, depending on the number of lines. However,
there is a maximum of 1800 characters for the total number of characters saved in up to 9 files.
Text and layout formatting data is also saved in the file.
• To store a label created by using the Auto-Format Layouts, refer to "Using Auto-Format
Layouts" on page 37.
56

Storing a Label into Memory

Storing a Label into Memory
or
or key.
or key to save the label under the
key to return to the previous step.
keys.
or key, and then