You can adjust the length of the printed label in levels of -5 to +5.
Press the
1
"Adjust Length" using the
the
or
Select "Adjust Length" by using the
2
then set the value by using the
Press the
3
• Press the
key to return to the previous step.
• Press the
• Approximately 1% of the total label length will be adjusted by 1 level.
If necessary, trim the printed label to the desired shape and length using scissors,
1
etc.
Peel the backing from the label.
2
The backing of some types of tapes may be pre-cut to
make it easier to peel the backing.
Position the label and then press firmly from top to bottom with your finger to
3
attach the label.
• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel
off easily from these surfaces.
• Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive
Tapes or other special tapes and observe all precautions noted in the instructions.
Adjusting the Label Length
key to display the setup menu, select
or
key.
or
key to apply the setting.
key to set the value to default setting.
Attaching Labels
key, and then press
or
key, and
or
key.
Adjusting the Label Length
1
2
3
4
5
6
7
8
9
55