Brother P-Touch PT-2100 User Manual page 48

EDITING A LABEL
Select an attribute using the
6
set a value for that attribute using the
Press the
the default value.
Press the
7
The block layout text entry screen is displayed.
Caps mode can be used when entering text.
Enter text and then press the
8
Repeat for each text field.
After all text fields are completed, press the
key to display the print menu.
Select "Print" using the
9
label.
• Select "Edit" to change the text data or style settings.
• Select "Save" to store the label in a file memory.
• Select "Quit" to exit the Auto-Format function.
• Select "Change Layout" to use a different layout.
• Press the
• Refer to the Block Layouts table on page 43 for a list of all available layouts.
• The "Clear All Text?" message is displayed when the
key to delete all text, or press the
• To print multiple copies, sequentially numbered copies, or a mirror image of the label, with
the print menu displayed hold down the
Options menu.
• If the width of the current tape cassette does not match the set width for the selected layout,
an error message is displayed when you try to print the label. Press the
key to clear the error message, and insert a tape cassette of the correct width.
• If the number of characters entered exceeds the limit, an error message is displayed when tthe
or
edit the text using fewer characters.
• When using the Auto-Format function the label is cut with a margin on the left and right ends
regardless of the current Tape Cutting Option setting (refer to page 53).
42
Using Auto-Format Layouts
key to set the selected attribute to
or key.
or
key to return to the previous step.
key is pressed. Press the
or keys, and then
or keys.
or key.
or
keys and then press the
key is pressed. Press the
key to not delete the text.
key and press the
key or any other key to clear the error message, and
or to print the
or
key to display the Print
key or any other