Mirror Printing - Brother P-Touch PT-2100 User Manual

LABEL PRINTING
• Press the
• Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to "Tape
Cutting Options" on page 53 to change this setting.
• The figures shown on the screen during printing indicate the "count / number of copies".
• Auto-numbering can also be applied to bar codes. When a bar code contains an auto-
numbering sequence, no other fields in the label can contain an auto-numbering sequence.
• The auto-number portion of the label is incremented after each label is printed.
• Only one auto-numbering sequence can be used in a label.
• Any symbols or other non-alphanumeric characters in the auto-numbering sequence are
ignored.
• An auto-numbering sequence can only contain a maximum of five characters.
• Letters and numbers increase as shown below:
0
A
a
A0
Spaces (shown as underlines "_" in the example below) can be used to adjust the spacing
between characters or to control the number of digits that are printed.
_9
_Z
1_9

Mirror Printing

Using the mirror printing function you can create labels with the text printed in reverse
so that they can be read from the opposite side when attached to glass or other
transparent material.
Make sure that the appropriate tape cassette is inserted and ready for printing.
1
Hold down the
2
display the print options screen, and then select
"Mirror" using the
Press the
3
The message "Mirror Print?" is displayed
Press the
4
The message shown on the right is displayed while
the label is being printed.
52
Printing a Label
key to return to the previous step.
1 ...9 0
B ...Z A
b ...z a
A1 ...A9 B0
10 ...99 00
AA ...ZZ AA
2_0 ...9_9 0_0
key and press the
or key.
or key.
or key.
...
...
...
...
...
...
...
key to