Inserting A Tape Cassette - Brother P-Touch PT-2100 User Manual

This P-touch labeler accepts tape cassettes of 9/64", 1/4", 3/8", 1/2" or 3/4" (3.5mm,
6mm, 9mm, 12mm, or 18mm) width.
• If the new tape cassette has a cardboard stopper, be sure to
remove the stopper before inserting the cassette.
• If the ink ribbon is loose, use your finger to wind the toothed
wheel in the direction of the arrow as shown on the tape cassette.
1
Check that the end of the tape is not bent and
that it passes through the tape guide.
If the tape is not passed through, pass it
through the tape guide referring to the
illustration.
2
Ensure that the P-touch labeler is powered off, then
lift open the tape compartment cover. If there is
already a tape cassette installed in the machine,
remove it by lifting the tape cassette straight up.

Inserting a Tape Cassette

End of tape
Tape guide
Inserting a Tape Cassette
1
2
3
4
5
6
7
8
9
19